MF FLOW模流分析进阶训练培训.ppt

欢迎进入MF世界 大綱說明 Model 修整 Mesh 必備條件 Meshing Modeling different types of gates 3D Runner balancing; preparation, analysis and interpretation of results Packing analysis Topics Covered Use of general attributes; setting, unsetting, checking Valve gates Overall interpretation of results New displaying techniques for results Analysis options in MFL How flow analysis effects other analysis types, such as cool and warp Model Cleanup Start with a good CAD model Suppress small features that are not wanted Blends Small radii fillets Best model is a fully connected solid model STL Patran IGES Radius In MPG Model Cleanup Start in Midplane Read in model Heal model Healing it several times in a row may continue to fix problem areas Squeeze model Model Cleanup Check for Mesh density Mesh size 1.5 times nominal wall is a good place to start Generally the courser the mesh the better Midplane will work Experimenting with different mesh sizes may be useful Free edges Shown as yellow lines High aspect ratios Shown by red markers at the nodes on the element Create midplane Free Edges High Aspect Ratio Elements Model Cleanup Check for midplane errors Proper connectivity Intersections How Save model Read into MFVIEW Change all elements to 1 color ae red p v all Squeeze nodes and element to check for overlapping elements. They will be gray Read model into MPG and fix problem areas Mesh density Aspect ratios Thickness' Connectivity, Density Thickness' Model Cleanup MFVIEW Check element thickness variation Average element thickness variation ag th 2.5 e th 2.4:2.6 Create surfaces MES CES Remesh if necessary Element Thickness Variation Thickness' Modified Surfaces Created QUESTIONS? Mesh Requirements Aspect ratio 6:1 Maximum 3:1 Average Checking Set Check AR Displaying Mesh Requirements Aspect Ratio Ratio of the longest side to the height perpendicular to that side. Maximum aspect ratio below 6:1, average 3:1 Checking Aspect Ratio Set command Quick menu Show Settings Quick Menu Extension