英语ASTM_A1008_A1008M-2007.pdf

Designation: A 1008/A 1008M – 07 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable1 This standard is issued under the fixed designation A 1008/A 1008M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (e) indicates an editorial change since the last revision or reapproval. 1. Scope* A 620/A 620M Specification for Drawing Steel (DS), 1.1 This specification covers cold-rolled, carbon, structural, Sheet, Carbon, Cold-Rolled3 high-strength low-alloy, high-strength low-alloy with im- A 941 Terminology Relating to Steel, Stainless Steel, Re- proved formability, solution hardened, and bake hardenable lated Alloys, and Ferroalloys steel sheet, in coils and cut lengths. E 18 Test Methods for Rockwell Hardness and Rockwell 1.2 Cold rolled steel sheet is available in the designations as Superficial Hardness of Metallic Materials listed in 4.1. E 517 Test Method for Plastic Strain Ratio r for Sheet Metal 1.3 This specification does not apply to steel strip as E 646 Test Method for Tensile Strain-Hardening Exponents described in Specification A 109/A 109M. (n -Values) of Metallic Sheet Materials 1.4 The values stat