锅炉及压力容器认证的检查表 ASME BPV checklist.pdfVIP

ASME BOILER PRESSURE VESSEL ACCREDITATION GUIDE FOR ASME REVIEW TEAMS FOR REVIEW OF APPLICANTS FOR ASME CERTIFICATES OF AUTHORIZATION (A, M, PP, S, E, V, HV, H, HLW, H (Cast Iron/Cast Aluminum), UD, UV, UV3, U, UM, U2, U3, RP, T, TD, TV) The American Society of Mechanical Engineers Three Park Avenue New York, NY 10016 A1.20-8/ 11 (1/13) INTRODUCTION This Guide is prepared for the use of ASME Review Teams. It is not intended to replace or interpret the requirements of the ASME Boiler and Pressure Vessel Code (BPVC). In addition, to assist the ASME Review Team, this Guide will be provided to Applicants for ASME Certificates of Authorization for their use in cross referencing the paragraphs in their Quality Control (QC) Manual with the applicable control requirements of the Code. This Guide is based on Section I, Section IV, Sections VIII Divisions 1, 2 and 3, Section X, and Section XII of the BPVC. The Guide is subject to revision based on changes made in the aforementioned Sections in the BPVC. A Review must cover a QC Manual and its implementation. It is recognized that the scope of work, QC Manual, and Manual implementation will vary from Applicant to Applicant. Therefore, the ASME Review Teams are advised that all aspects of this Guide may not apply and that this Guide may not outline all possible aspects of each