- 1、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。。
- 2、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 3、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
某宾馆建筑施工总体设计
目 录
摘 要 1
ABSTRACT 2
第一章 建筑设计 3
1.1 工程概况 3
1.2 建筑平面设计 3
1.3 建筑剖面设计 4
1.3.1层数和层高 4
1.3.2室内外高差 4
1.4 建筑立面设计 4
1.5 防火 4
1.6 关于建筑构造考虑和设计 4
1.6.1墙体 4
1.6.2屋面做法 4
1.6.3楼面做法 5
1.6.4地面做法 5
1.6.5散水做法 5
1.6..6变形缝设置 5
1.7 本设计特点 5
第二章 结 构 设 计 5
2.1 设计资料 5
2.1.1工程概况: 5
2.1.2.气象条件: 6
2.1.3.工程地质条件: 6
2.1.4.屋面及楼面做法: 6
2.1.5.其他说明 6
2.2结构置方案及结构选型 6
2.2.1.确定结构计算简图 6
2.2.2.主要构件选型及尺寸初步估算 7
2.2.3 框架计算简图及梁柱线刚度计算 9
2.3恒载标准值计算 11
2.4 活荷载及其内力分析 18
2.5风荷载及其内力分析 25
2.6.2.框架柱内力组合 35
2.7截面设计 43
2.8框架柱截面设计 52
2.11基础设计 61
2.11.1边柱独立基础 61
第三章 施工组织设计 64
3.1工程概况 64
3.2施工部署 64
3.2.1.施工设想 64
3.2.2 施工原则 65
3.2.3工程施工流程 65
3.3工程施工方案 65
3.3.1施工总程序 65
3.3.2施工段的划分 65
3.3.3主要项目施工方法及施工顺序 65
3.3.4主体结构工程 66
3.3.5屋面工程 66
3.3.6楼面和装修工程 66
3.4工程量计算 67
3.5质量、安全、消防、节约、冬雨期施工措施 67
3.5.1质量管理措施 67
3.5.2安全管理措施 68
3.5.3防护管理措施 68
3.5.4节约措施 68
3.5.5冬季、雨季施工措施 68
结 束 语 69
摘 要
关键词:建筑设计;结构计算;结构布置;内力计算;配筋计算
ABSTRACT
The title of this thesis design is a hotel of Library in Hunan province. Total construction area is about 6862sq.m, frame structure, 7floors. The first and second of the floor is4.2m. The third to seven of the floor is 3.0m .the design strength of anti-earthquake is below 6 degrees,belongs to the unearthquake-resistant design.
This design is divided into three parts: architectural design, structure design and construction organization design. This thesis includes all the calculations of the design process and related elucidations.
Among the architectural design, primarily there are building plane design, building facade design and the design of the building profile, and there are other detail structural design in this part. Among the structural design, primarily there are the arrangement of structure, the selection of structure type, a complete calculation of one part of the frame (includes the calculation of load and force, combination of forces, design of section and calculation of reinforcement). Besides, there are design of column foundation, stairs, pored concrete slab
文档评论(0)