高炉灰在球团和金属化球团工艺中高效使用技术的研究.pdfVIP

高炉灰在球团和金属化球团工艺中高效使用技术的研究 1 1 1 2 3 段东平 韩宏亮 陈思明 曹向会 冯根生 （1. 中国科学院过程工程研究所，北京 100190 ；2. 中国科学院唐山高新技术研究与转化中心， 唐山 063000 ；3. 北京科技大学冶金与生态工程学院，北京 100083 ） 摘 要 为了经济、合理地利用高炉灰资源，本研究在掌握高炉灰特性的基础上，进行了高炉灰在球团和金属化球团 工艺中高效使用的试验研究。试验结果表明，球团生产中配加高炉灰是可行的，但为了满足高炉的生产要求，其使用 比例不宜超过 10%，且其焙烧温度应在 1250℃以上；对于金属化球团工艺，不但能够有效地利用高炉灰中的Fe、C 等元素，而且能够把高炉灰中Pb、Zn 等有色金属进行烟气富集，并通过多段湿法工艺分离提取出来，实现高炉灰的 再资源化综合利用。通过本研究，为高炉灰在球团和金属化球团工艺中的高效使用奠定理论基础和技术依据。1 关键词 高炉灰 球团 金属化球团 高效使用 High Effective Utilization of Blast Furnace Dust in Pelletizing and Metalized Pelletizing Processes Duan Dongping1 Han Hongliang1 Chen Siming1 Cao Xianghui2 Feng Gensheng3 (1. Process Engineering Institute, The Chinese Academy of Sciences, Beijing, 100190; 2.Tangshan Research and Commercialization Center for High-tech Chinese Academy of Sciences, Tangshan,063000; 3. School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing, 100083) Abstract In this study, for economic and rational use of blast furnace dust resource, fundamental properties of blast furnace dust were investigated firstly. Based on which, the experiments of blast furnace dust adding in pelletizing and metalized pelletizing processes were studied. The results showed that it can be added with a certain amount of blast furnace dust in pelletizing process, but in order to meet the blast furnace production requirements, the ratio of blast furnace dust should not be more than 10%, and the roast temperature should be above 1250℃. For the metalized pelletizing process, it can not only effectively use Fe, C in blast furnace dust, but also collect non-ferrous metal