攀钢高炉渣性能分析.pdfVIP

攀钢高炉渣性能分析 1 2 谢洪恩 吕志敏 （1.攀钢集团研究院有限公司，成都 611731 ； 2.河北钢铁集团宣钢分公司炼铁厂，张家口 075100 ） 摘 要 攀钢高炉渣是典型的高钛型高炉渣，炉渣 TiO 含量超过 20%，炉渣性能在很大程度上受渣中TiO 还原程 2 2 度的影响。攀钢高炉渣实际上是一种 CaO-SiO -MgO-Al O -TiO 五元炉渣，渣中 TiO 含量目前约 21%~22% 。渣中 2 2 3 2 2 硅酸盐相矿物约占 70%~80% ，钛酸盐相约占 20% ，其余矿物为金属铁和碳氮化钛固溶体。炉渣熔化性温度约 1360~1380℃，炉渣熔化性温度区间一般约 20~30 ℃。在正常炉况下，在高温下液态炉渣的黏度约 0.5Pa ·s。TiO2 的过还原是导致炉渣变稠的根本原因，但是其对炉渣性能的影响机理仍需进一步深入研究。1 关键词 高炉 炉渣 TiO2 Property Analyses of Pangang Blast Furnace Slag Xie Hongen1 Lv Zhimin2 (1.PanGang group Research Institute Co., Ltd. , Chengdu, 611731； 2. Iron Works, Xuan gang Company , Hebei Iron and Steel Co. ,Ltd., Zhangjiakou, 075100) Abstract Pangang blast furnace slag is typicla high TiO containing slag ，the TiO content of which exceeds 20%. The 2 2 properties of this kind of blast furnace slag were influenced by the reduction rate of TiO2 of slag to a considerable extent. In fact, the blast furnace slag of Pangang was CaO-SiO -MgO-Al O -TiO slag. The TiO content of slag was about 21%~22% 2 2 3 2 2 at present. The contents of silicate phases of slag were about 70%~80%, and the content of titanate phases were about 20%, and the other phases were metallic iron and titanium carbonitride solid solution. The melt point temperature of blast furnace slag was about 13