某厂区室外中压电缆敷设施工方案（中英文）.docxVIP

TDI train - Infrastructure Electrical System InstallationMV Cable Pulling Construction PlanTDI联合装置-基础设施电气系统安装　中压电缆敷设施工方案B11/30/2009ISSUED FOR COMMENTSA11/26/2009ISSUED FOR COMMENTSRevDateDD/MM/YYSTATUSPREPARED BYCHECKED BYAPPROVED BYDOCUMENT REVISIONS目录Content一. 概况 Overview31.1 工程概况 Project Overview31.2 施工范围 Scope of Work3二．编制依据 Compilation Basis4三．施工工艺流程：Construction Process4四. 前期准备 Preparation44.1 技术准备 Technical Preparation44.2 材料准备Material Preparation54.3 主要机具准备 Main Equipment Preparation54.4 作业环境准备 Work Environment Preparation6五. 敷设施工 Work of Cable Pulling65.1 电缆敷设施工工序Work Procedure65.2 机具布置 Layout of Tools65.2.1 电缆的搬运及支架架设Cable Removal and Cable Tray65.2.2 卷扬机与滑轮的布置 Winch and Pulley Arrangement65.3 电缆展放Lay-off Cable105.4 电缆敷设、固定Cable Laying and Fixing12六. 覆砂盖砖Spread Sand and Cover Bricks12七. 回填土Backfill Earth13八. 埋标桩Burying Stake13九. 挂标志牌Hanging signs13十. 质量控制Quality Control1310.1 主控项目Master Items1310.2 一般项目General Items14十一. 成品保护Finished Protection14十二. 质量记录Quality Record1412.1 质量保证资料Quality Assurance Information1412.2 施工记录Construction of Record15十三. 安全生产、文明施工要求和措施 Safety and Civilized Construction Requests and Measures15一. 概况 Overview1.1 工程概况 Project Overview项目名称： TDI联合装置厂区中压电缆敷设施工。Project name: TDI TrainPlant Medium Voltage Cable PullingWork.本工程涉及三个变电站，分别是现有的220/35kV A472变电站、现有的35/10kV B301S变电站以及新建的35/10kV C581变电站，工作内容为三个变电站之间和从三个变电站接至MV用户的电力电缆、控制电缆、接地电缆的敷设。The project involves three substations, namely the existing 220/35kV A472 substation, the existing 35/10kV B301S the 35/10kV C581 substation and a new substation.This is the power, control and grounding cable pulling among three substationsand for MV users connected to the three substations.1.2 施工范围 Scope of Work1) A472建筑（220/35kV变电站）出线回路：A472 Building(220/35kV substation) outlet circuit由A472变电站引出3路35kV出线。其中：一路引至B301S建筑（35/10kV变电站）原1#主变，原1#主变电缆将抽出，与新增4#主变连接；另两路引至35/10kV C581变电站1#主变和2#主变。回路采用FS-YJY-26/35kV-1*300mm2单芯电缆，直埋敷设。去C581的两路35kV线路，敷设时沿不同路径，以避免两回线路同时受损。Pull three