电树枝老化.pdfVIP

R. Vogelsang, R. Brütsch, T. Farr, K. Fröhlich: „Electrical tree propagation along barrier-interfaces in epoxy resin“ Electrical tree propagation along barrier-interfaces in epoxy resin 1 2 1 1 R. Vogelsang (Student member IEEE), R. Brütsch , T. Farr and K. Fröhlich (Fellow IEEE) 1High Voltage Laboratory at the Swiss Federal Institute of Technology Zürich, Switzerland 2Von Roll Isola AG Breitenbach, Switzerland Abstract: The propagation of electrical trees along This approach is expanded by the investigations of interfaces in epoxy resin is described. The electrical Auckland et al. [8] who found that adhesion trees grew in needle-plane samples without and with mechanisms may play an important role in tree growth internal barriers up to the final breakdown. The barrier at barriers. In these investigations, the electrical tree materials glass, mica and PTFE had been chosen could travel along as well as through the barriers. In because they have significantly different bond contrast, the present authors ensured that the electrical mechanisms to the epoxy resin as well as being tree had to propagate along the barriers and could not common materials in various composite high voltage penetrate them. The electrical breakdown values are insulation systems. The mechanical strength of the compared to the externally measurable values of the systems barrier material – epoxy resin was determined