毕业设计（论文）--箱体注塑模CADCAM说明书.doc

毕业设计（论文）报告 箱体注塑模CAD/CAM 摘要 主要介绍了箱体注塑模具设计。这副模具采用一模四腔，浇口为侧浇口，分型面选择在塑件外形最大轮廓处，侧浇口开设在分型面上。主流道设计成锥形，分流道截面成半圆形。推出机构运作时主要靠推杆推动推件板来实现。模具可通过分型面和推杆的间隙来排气。 从控制制件尺寸精度出发，对箱体注塑模的各主要尺寸进行了理论计算，以确定各工作零件的尺寸。选择模架和注塑机，并对主要参数进行校核。 利用CAD和UG软件绘出总装图和零件图；数控铣出成型零件。 关键词：箱体；侧浇口；推出机构；零件图 Abstract： This design mainly introduces the cabinet injection mould. This pair of mould adopts a mould for four cavity, the sprue is side gate, parting surface select in the maximum outline of plastics appearance, side gate was open in parting surface. Main Runner designs into tapered ，and branch runner selects in a semicircle. When ejection system operated, it mainly achieve by pin pushing stripper plate. Mould can exhausted through the clearance of parting surface and pin. Starting from controlling dimensional accuracy, the carry the box to the main dimensions of injection molding are carried out so as to determine the size of different parts. Choosing formwork and plastic injection machine, and checking the main parameters. Using CAD and UG software to draw assembly figure and detail drawing;using Numerical Control to mill out molding parts. Key words：?CabinetSide gate ejection system detail drawing 目录 前言·················································· (4) 1.1应用背景及意义··········································· (4) 1.2论文设计内容············································· (4) 1.3论文设计重点、难点······································· (4) 方案论证·············································· (5) 2.1 结构分析··············································· (5) 2.2 成型工艺分析··········································· (5) 2.3 生产规模··············································· (6) 箱体注射模结构设计··································· (7) 3.1成型零件设计············································ (7) 3.2浇注系统设计············································ (9) 3.3推出机构的设计·········································· (11) 3.4排气系统的设计·········································· (12) 3.5冷却系统的设计·········································· (12) 3.6模架与注射机的选