乙烯酯玻璃鳞片中涂漆100.docVIP

Intended Uses 用途 适用于FGD低温系统钢结构内壁和所有混凝土结构的防腐中涂层，包括静烟道、箱罐内壁、排水坑、沟道、浆液池等。也适用于一些与其它腐蚀性化学介质接触部位，关于适用介质种类请向本公司咨询。涂层长期使用温度为100℃及以下。 Suited for painting the inner surface of FGD low temperature steel structure.As a intermediate paint,it is also suited for painting concrete structure ,including stovepipe, inner surface of tin or tank, scupper shoot, irritation canals and ditches, waster serum pool etc…….It is suited for anti-corrosive protecting the area which is close to chemials too. About the details ,please consult to use .The proper temperature is below 100℃ Product Information产品简介 乙烯酯树脂鳞片涂料，以双酚A型乙烯酯树脂为主要成膜基料，加入20～80目片径的粗玻璃鳞片、颜填料、少量活性稀释剂、消泡、抗流挂等助剂，施工时按照一定比例加入乙（固化剂）、丙（促进剂）组份，混合均匀。极佳的硬度和耐磨性能；柔韧性、耐温变和抗疲劳性特性，附着良好；漆膜具有“迷宫”效应，抗介质渗透能力极强；抗化学物质，耐常见化学品腐蚀；具有一定耐热性（100℃）。 Vinyl ester paint:This paint contains p-hydroxy phenol type of vinyl ester and glass flake(20-80D),pigments, activity thinner, foam control agent, disperson agent etcassistants,Before applacation, please add conponent B and Cinto conponent , stir it thoroughly Excellent hardness and scratch-resiastant property Flexbility, heat-resistant and durable, excellent adhesion Seepage to chemicals, anti-corrosive to usual chemicals Heat-resistant（100℃） Application details 产品数据 Volume Solids 固体份 ≥96% Colour 颜色 无色，也可按照客户要求调配颜色 Transparent or any color according to Custome,srequests Dry Flm Thickness干膜厚度 800-1000microns 800-1000微米 Theoretical Coverage 理论涂布率 0.7m2 /Kg 0.7平方米/公斤 Practical Coverage 实际涂布率 Allow appropriate loss 允许适量损耗 Storage and Handling 施工详述 Allow appropiate 气温﹤10度 A:B:C=20:0.2:0.16(by weight ) 气温﹥10度 A:B:C=20:0.16:0.16(by weight ) During mixing and Using ,be sure that it is free from foreign substances 混合和使用过程中应避免混入水等杂质 Induction Time 熟化时间 Not necessary 不需要熟化 Pot Life 使用期 15℃：60min; 25℃:40min; 35℃:15min We can adjust the pot life and drying time accord