预制溷凝土框架结构抗震性能试验研究- Tests on Precast Concrete Frames with Connections.pdfVIP

ACI STRUCTURAL JOURNAL TECHNICAL PAPER Title no. 103-S03 Tests on Precast Concrete Frames with Connections Constructed Away from Column Faces by Jyh-Hao Khoo, Bing Li, and Woon-Kwong Yip A modified assembled configuration is introduced for precast usually located at the beam-column joint cores; or at the concrete frames in which the connections are constructed on the midspan of a beam. Providing connection in the beam- beam span and kept away from the column faces so as to avoid column joint region is apparently unfavorable because it coinciding with the plastic hinge regions during seismic excitations. disturbs the continuity of reinforcement. The congested An experimental study on the se ismic performances of two full- reinforcement details in the joints always create difficulties scale precast concrete subframes adopting the aforementioned configuration and a monolithically-cast subframe subjected to during the erection stage. Moreover, the beam-column joints quasistatic simulated seismic loading is presented. The variable can be vulnerable under seismic actions as they are subjected examined was the connection detail. The performances of the to reverse bending moments and shear forces. The induced precast concrete frames are evaluated on the basis of ductility, energy shear forces in the joint region can typically be in the order dissipation capacity, connection strength, and drift capacity. Based of five times the column shear force.4 A precast beam is on the test results, the precast conc