基于以太网的5层电梯PLC控制系统.pdf

基于力控的以太网 5 层电梯控制系统设计 摘 要 电梯是服务于规定楼层的固定式升降设备。它具有一个轿厢，运行在至少两 列垂直斜角小于 0 的刚性轨道之间。轿厢尺寸与结构性是便于乘客出入或装卸 15 货物。它适用于装置在两层以上的建筑内，是输送人员或货物的垂直提升设备的 交通工具。本题的为 5 层电梯控制系统的设计。通过的对 5 层电梯控制系统的充 分调研的基础上，提出以套用性价比比较高的硬件配置方案，采用开放、标准和 廉价的以太网络，实现底层网络与管理网络的连接。本课题主要实现对五层电梯 控制系统（即模块型 PLC ）的配置、通信系统的配置、人机界面组态、控制软 件设计等。利用控制以太网和通用组态软件技术完成上下位机数据的交换，现场 总线通信系统的设计，上位监控系统的人机界面设计等，利用专用控制软件完成 此系统控制软件的设计。 关键词：电梯，PLC ，以太网络 I 基于力控的以太网 5 层电梯控制系统设计 Abstract The elevator is a provision floor that service ascend and descend the equipments in the fixed type.It has a box , circulating at least two smaller and rigid orbit in perpendicular oblique angle in rows.The size of box is easy to passenger's discrepancy with construction or pack the discharge thing.It is applicable to equip in twoth layers above of building, is pileup that perpendicularity to transport personnel or goods promote the equipments.Subject of for 5 layer elevators control the design of the system.Pass of to 5 foundations that layer elevator control systems well investigate are last, putting forward with a conjunction for with the everywhere higher hardware in price in sex installing project, adopting openning, standard with cheap ether network, realizing first floor network and managing network.This lesson realizes primarily to five layer elevator control system( namely mold a type PLC)s install, the correspondence system installs, man-machine interface of the appearance supervises and control , control software design etc..Make use of to control the ether net to complete the commutation of the top and bottom a machine data with the in general use the appearance supervises and control software technique, the total line in the spot corresponds by letter the design of the system, the place of honor superv