甲基-二乙醇胺脱硫剂净化除杂质工艺设计.pdf

甲基-二乙醇胺脱硫剂净化除杂质工艺设计 摘 要 目前炼厂气等中含有较高的H S，必须经脱硫处理，而脱硫溶剂中的杂质， 2 会容易使溶剂发泡，产生一些不理想的效果，因此清除溶剂中的焦粉、铁锈、降 解物等固体颗粒, 对避免溶剂发泡, 对于保护设备、延长装置开工周期、提高经 济效益意义重大。本文通过对甲基-二乙醇胺脱硫剂净化除杂质工艺及设备的设 计，阐述了反冲洗过滤器和高分子精密微孔过滤器现状及发展趋势，对连续过滤 5 3 等工艺进行了研究。本设计通过对年处理量 m 的两种过滤机的设计,拟完 4 10× 成一套工艺先进、设备成本低、对环境污染低、连续生产能力强的过滤装置，投 入运行后期望获得良好的经济效益,最后经过工艺计算,确定了设备的参数及选 型。 关键词: 过滤器，脱硫，连续生产，工艺计算 I 甲基-二乙醇胺脱硫剂净化除杂质工艺设计 Abstract At present, refinery gas contains a higher hydrogen sulfide, it must be approved by the desulfurization treatment, and the desulfurization of impurities in the solvent will easily made solvent foam, bringing some effect we didn't expect, therefore removing the coke powder, rust, degradation Of solid particles in solvent will avoid solvent to foam, for the protection of equipment, extending the equipment running cycle, increasing economic efficiency, showed great significance. Based on the design of methyl - diethanolamine desulfurizer purification removing impurities technology and equipment, expounded the backwash filter and filter porous polymer precision the status quo and development trend, and continuous filtering process was studied. Through the design of the two filter which has throughput of 400 thousand, planing to complete a set of advanced technology, equipment costs low, low environmental pollution, strong production capacity for filtering devices, to get good economic returns after running on stream , finally by technics process, determine the parameters of the equipment and selection. Key Wo