2009年TD-SCDMA信令培训.pptVIP

TD-SCDMA信令培训 Dingli Communications Inc. 2009/06/22 人力资源部 Thanks Dingli Communications Inc. Jan.2009 UE要接受网络服务，必须首先在接入层和UTRAN建立RRC连接。随机接入发起RRC CONN REQ，建立UTRAN分配的信道。然后再利用该接入层连接与核心网进行非接入层的信令交互。 RRC Connection Request is the first message transmitted by the UE when setting up an RRC Connection to the network. Initial UE identity :This information element identifies the UE at a request of an RRC connection.这里UE是否有可用的TMSI、PTMSI、IMSI、IMEI信息，按优先级选择一个UE标识填写。 Establishment cause :Enumerated(Originating Conversational Call,Originating Streaming Call,Originating Interactive Call,Originating Background Call,Originating Subscribed traffic Call,Terminating Conversational Call,Terminating Streaming Call,Terminating Interactive Call,Terminating Background Call,Emergency Call,Inter-RAT cell re-selection,Inter-RAT cell change order,Registration, Detach,Originating High Priority Signalling,Originating Low Priority Signalling,Call re-establishment,Terminating High Priority Signalling,Terminating Low Priority Signalling,Terminating – cause unknown) Protocol error indicator :协议错误指示 TRUE means a protocol error occurred. FALSE means a protocol error did not occur. Measured results on RACH：在不超出消息长度的范围内，上报对SIB 11中指定的同频小区（监视集）的从RACH上报的测量结果，内容包括小区主扰码和导频Ec/No的质量。 连接管理子层服务请求 NAS信令建立流程：UE与CN之间交换DT消息，如鉴权、业务请求、连接建立等。 鉴权 鉴权 Ciphering algorithm capability :UEA0 /UEA1 /Spare Integrity protection algorithm capability :UIA1 /Spare 初始化主叫的呼叫建立过程 初始化主叫的呼叫建立过程 初始化主叫的呼叫建立过程 This message is sent by UTRAN to the UE to establish new radio bearer(s). It can also include modifications to the configurations of transport channels and/or physical channels. Activation time ：Activation Time defines the frame number/time at which the operation/changes caused by the related message shall take effect. Values between 0 and 255 indicate the absolute value of CFN (Connection Frame Number) of that frame number/time. Integer(0..255) CFN [10] URA identity ：Gives the identity of the UTRAN Registration Area. It can