年产8000吨塑料门窗异型材生产线及80型推拉框口模设计.doc

PAGE PAGE I 年产8000吨塑料门窗异型材生产线及80型推拉框口模设计 摘 要 塑料门窗具有传统门窗难以比拟的优异性能，是国家建设部推广使用的节能、环保型产品。目前已广泛用于各种建筑工程中，其发展空间很大，前景十分看好。本设计即为U-PVC塑料门窗生产线设计。设计包含两部分内容，一是年产8000吨塑料门窗异型材生产线设计，二是80型推拉框挤出口模的设计。生产线的设计包括总体方案的制定、产品配方的设计、物料衡算、生产线设备的选择、生产工艺的设计等几部分内容。口模的设计包括80型推拉框横截面的设计和80型推拉框口模的设计。其中，配方设计、混料工艺设计和型材挤出质量的控制是异型材产品具有良好的质量和性能的重要保障，也是本设计的重点。 关键词：塑料异型材，推拉框，挤出工艺，挤出模  Design on the production lines of 8,000 tons/a plastic door and window profiles and the die of 80 sliding sash Abstract Plastic doors and windows has excellent performance that traditional doors and windows difficult to compare. It is so energy-saving and environment-friendly as to becoming the product that ministry of our construction promotes it’s use. For the present, plastic doors and windows has been widely used in all kinds of architectural engineering, it has a bright future. This is a design on the U-PVC plastic door and window productive line. The design contains two parts of content.A part is the design on productive lines that can produce about 8,000 tons/year plastic door and window profiles; the other is about the design on the die of 80 sliding sash. The design on productive lines contains development of overall program, design on product formula, material balance, equipment selection of productive lines, design on production process, and so on. The design on the die contains design on cross section of 80 sliding sash and design on the die of 80 sliding sash. In order to obtain profile products with good quality and performance, the design on formula, design on mixing process and quality control of profile extrusion are very important, and they are the focus of this design as well. Key words: plastic profile, sliding sash, extrusion process, extrusion die 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc296005628 摘 要 PAGEREF _Toc296005628 \h I HYPERLINK \l _Toc296005629 Abstract PAGEREF _Toc296005629 \h II HYPERLINK \l _Toc296005630 第1章 概 述 PAGEREF _Toc296005630 \h 1 HYPERLINK \l _Toc296005631 1