副轴装配组件加工工艺规程分析及专用夹具设计说明书.doc

毕 业 设 计 题目： 副轴装配组件加工工艺规程分析及专用夹具设计 副轴装配组件加工工艺规程分析及专用夹具设计 摘 要 KRW副轴装配组件是某知名摩托车发动机的重要组成部分之一，用来降低转速和增大转矩。本文按照零件工艺设计的基本流程，经过对比论证，选择了实用正确的工艺路线。首先，对副轴装配组件的结构进行了分析，其次从零件工艺分析到工艺流程的确定以及切削用量的计算，每步都给出了详细的说明。还设计了盘形齿轮滚齿夹具，对切削力、夹紧力、定位误差进行了计算，对工作原理以及使用方法也给出了详细的解释。最后，通过CAD绘图软件，绘制出零件的零件图、毛坯图及夹具工装图。 关键词：KRW副轴装配组件，工艺设计，切削用量，CAD绘图 Analysis of Process Technology of the Layshaft Subassembly and Design of a Special Fixture Abstract KRW layshaft subassembly is an important part of a well-known motorcycle engine, used to reduce rotating speed and increase torque. This text made a comparison argument of the basic process of the technology in accessory design, and chose the practical process route. Firstly, it made an analysis of the structure of the layshaft subassembly；Secondly, gave a detailed description of each step，from the process analysis of the subassembly to the determination of technical conditions and the calculation of cutting amount. In addition, designed a disk gear hobbing fixture, and the cutting force, clamping force and position error were calculated, and also gave an elaborate interpretation of operational principle and use-method . Finally, draw the component graphs ,blank