河北工程大学土木工程学院毕业论文_轻钢结构构件工字型截面弯扭耦合分析.doc

摘 要Matlab分析程序分析，为方案的确定和初步设计的完成提供较为准确的依据，并为这种方法的研究结果与其他方法尽心分析对比，对各种计算模型的优劣和适用范围进行评判。通过具体结构算例分析。本文研究使理论接近现实，更加具有现实研究意义，为结构设计人员提供一种新的分析结构的理论，也为工程中解决此类问题提供了一种新的方法。 关键词:  Abstract In the current structure of steel is widely used in all kinds of buildings , bending and torsion coupling light steel structure is the focus of the analysis of one of the issues , some scholars and researchers for light steel structure analyzes done a lot of research, as research, this rod bending and torsion coupling effects between the more and more attention , especially when this rod has an asymmetrical cross-section and shear can not be ignored , it must be considered between bending and torsion coupling effect. This departure from the research status of the parties involved in the project will be carried out systematic introduction of research results , and then pointed out the importance of the research direction for the paper launched the foundation. Using some of the theories of light steel structure , re-use of dual Hamiltonian system on the light steel structure shaped cross section for bending and torsion coupling analysis, analysis of preparation of the corresponding Matlab program analysis , for the program to determine the completion of the preliminary design and provide more accurate basis, and as a result of this approach dedicated analysis and comparison with other methods , a variety of computational models to judge the merits and scope . Structural analysis through specific examples . In this paper, the theory closer to reality , even more practical significance for the structural design provides a new analysis of the structure of the theory , but also to solve such problems as the project provides a new approach. Keywords: light steel structure ; shaped cross-section ; torsional coupled analysis ; interpolation integral method ; Hamiltonian dual system ; thin-walled members 1 绪 论 1.1 。一栋两层200的组合房屋6个工人一天半就可以安装完毕，马上即可投入使用，是工业化程度最高的钢结构建筑； 可以销售也可以租赁的灵活经营模式，为用户提供多种选择和服务；