基于fr-s540通用变频器的两翼旋转门控制系统设计_毕业设计（论文）.docxVIP

基于FR-S540通用变频器的两翼自动旋转门控制系统设计摘要两翼自动旋转门作为自动门中的顶级产品，旋转门给人以亲切大方的感觉，同时营造出奢华的气氛，堪称建筑物的点睛之笔。该论文主要论述了两翼自动旋转门的设计过程，主要论述两翼旋转门的控制系统的设计，通过变频器来调节门体速度，并分析了该控制系统的工作原理及系统的硬件组成，分析了人体感应探测、两翼旋转门运行位置检测、门运行障碍检测等控制电路的工作过程，对PLC的选型、变频器的选型、I/O点的确定及两翼旋转门的动作过程等方面进行了详细阐述。结合PLC的运行特点，对控制系统的工作流程作了合理的优化。在此基础上，给出了控制系统软件设计的外部端子接线图及PLC控制梯形图等。本设计介绍应用可编程控制器取代传统的继电器、接触器控制系统，实现两翼旋转门控制的过程。关键词: 两翼自动旋转门，可编程控制器，变频器Abstract Two wings automatic revolving door is leading products, the revolving door giving others a warm feeling generous, but also create an atmosphere of luxury, is the punchline buildings.This paper mainly discusses the design process of two wings automatic revolving door, the design focuses on the revolving door control system, through the inverter to adjust speed of the door body, and analyzes the working principle and system of the control system hardware composition, analysis of the human induction probe, revolving door operation position detection, detection of door operation obstacles work process control circuit, selection of PLC, transducer selection, I\/O point determination and revolving door movement process in aspects of the detail. According to the operating characteristics of PLC, the control system were reasonable workflow optimization. On this basis, function flow chart of the program,external control terminal wiring diagram and PLC ladder diagram is given. This design introduces the application of programmable controller to replace the traditional relay, contactor control system, the realization process of revolving door control.Keywords: two wings automatic revolving door, programmable controller, inverter目录摘要IAbstractII1 引言- 3 -1.1 研究的背景和意义- 3 -1.3 两翼旋转门技术发展方向- 3 -1.4 两翼旋转门研究的必要性- 3 -2 两翼旋转门控制系统总体方案设计- 3 -2.1 两翼旋转门系统的基本结构- 3 -2.2 两翼旋转门控制要求- 3 -2.3 两翼旋转门控制方案的确定- 3 -3 自动门硬件系统的设计- 3 -3.1 PLC的简要介绍- 3 -3.2 PLC的选型- 3 -3.3 PLC的I/O点分配- 3 -3.4 电动机的选型- 3 -3.5 变频器容量选择- 3 -3.6 两翼旋转门控制系统原理简述- 3 -4 变频器的参数设定及功能选择- 3 -4.1 变频调速的基本原理- 3 -4.2 三菱FR-540变频器的面板- 3 -4.2 三菱变频器FR-540端口介绍和连线方法- 3 -4.3 功