毕业设计论文 数控 零件、工艺、数空加工程序.docVIP

毕 业 设 计（论 文） 题 目： 系 别： 机电工程系 专 业： 机电一体化技术 班 级： 机电10班 学生姓名： 指导教师： 完成日期： 2010-3-1 摘 要 本设计是对这两年所学知识的一个巩固和加强，是理论联系实际的重要环节，也是恰当地利用所学基础知识，专业基础知识和设计基础等资料及零件制造工艺设计，对我们而言，是一个比较重要的环节，可为今后的工作打下良好的基础。此设计在编写过程中始终得到魏老师和周老师的指导及同学们的帮助，在此对他们表示衷心的感谢!由于所学知识有限及能力不足，难免有不妥和错误之处，恳请老师们给予指正。 本设计包含了机械制造与设计、金属工艺、机械制图、AutoCAD、pro/E、Abstract This design is for the past two years have learned a consolidated and strengthened, and is the theory with practice is an important link, it is a proper use of the basic knowledge and professional knowledge and design based on the basis of information and designing the parts of the manufacturing process, all of us is a more important link for the job, but we have good foundation. The design process was written by wei the teacher and the week the teachers instructions and the students. here they express our heartfelt gratitude! learning knowledge is limited and, it is unwise and wrong, and the teachers to mold. The design includes machinery manufacturing processes and designs, and metal, drawings, autocad, pro e, CNC production process, CNC programming and basic knowledge, necessary for processing solutions to meet the requirements of the processing of the machine parts, the process design, searching for information and improve the actual operation, the needs of modern production. the processing technology and CNC programming from the piston rod parts, in order to achieve the most reasonable and the processing and CNC program Key words:Parts、Technology processes、CNC programming 目 录 1机床主轴零件的分析 1 1.1机床主轴零件的作用 1 1.2机床主轴零件的工艺分析 2 2工艺规程的设计 3 2.1确定毛坯的制造形式……………………………………………………………………3 2.2基面的选择……………………………………………………………………4 2.3螺纹的计算……………………………………………………………………5 2.4数控加工工序卡………………………………………………………………6 2.5确定切削用量和被吃刀量……………………………………………………7 2.6制定工艺路线…………………………………………………………………9 2.7机床的选择……………………………………………………………………10 3程序编制………………………………………………………………………………………13 4三维图形……………………………………………………………………………………14 5心得体会 15 6致谢 16 7参考文献 17 机床主轴