唐山学院液压方向多功能棒料折弯机液压系统设计.docVIP

唐 山 学 院 毕 业 设 计 设计题目：多功能棒料折弯机液压系统设计 系 别： 机电工程系 班 级： 09机本3 姓　 　名： X X X 指 导 教 师： 魏雪丽 2013年6月2日 多功能棒料折弯机液压系统设计 摘要 棒料折弯尤其是棒料一次折多个弯是一项效率低、能耗高、噪音大和加工成本高的工作，设计合理的折弯机液压系统对提高工作效率、降低噪音、优化工作环境、降低生产成本和提高安全性都有着重要意义。本课题设计了一套多功能棒料折弯机液压系统，该系统采用典型的双泵+三缸结构，双泵给左右折弯缸单独供油满足了该液压系统对工作抗干扰能力的要求；采用单向节流阀回油节流调速方式既降低了制造成本又能实现液压系统的平稳运行；多根棒料同时折弯以及多根棒料一次折多个弯不仅降低了生产成本还大大提高了生产效率。本课题涉及了多功能棒料折弯机液压系统原理图的拟定，液压系统的分析与计算，集成块设计和液压站的组建，可作为多功能棒料折弯机液压系统设计和故障诊断的参考资料。 关键词：棒料折弯机 抗干扰 液压系统 Multifunction bar bending machine hydraulic system design Abstract Rod bending, especially off the bar once more bent is a low efficiency, high energy consumption, high noise and processing costs work properly designed bending machine hydraulic system to improve work efficiency, reduce noise and optimize the work environment , reduce production costs and improve security are of great significance. This topic has designed a versatile rod bending machine hydraulic system, which uses a typical dual pump + triplex structure, dual pump to bend around a separate oil tank meets the system requirements for working anti-jamming capability; a one-way throttle throttle way back to the oil not only reduces manufacturing costs but also to achieve the smooth operation of the hydraulic system; multi-feed while bending rods and a plurality of rods fold once more bent not only reduces the cost of production greatly improving production efficiency. This topic relates to a multi-function bar bending machine hydraulic system schematic formulation, analysis and calculation of the hydraulic system, manifold designs and builds hydraulic station, available as a multifunction bar bending machine hydraulic system design and troubleshooting reference data. Keywords: bar bending machine interference hydraulic system 目录 1.引言 1 2.液压系统的设计计算 2 2.1原始参数分析 2 2.1.1原始参数和动作循环 2 2.1.2运动和动力分析 2 2.2工况分析 2 2.2.1计算压紧缸各阶段的外负载 3 2.2.2计算左折弯液压缸各阶段的外负载 3 2.2.3计算左折弯缸各阶段的外负载 5 2.3拟定液压系统原理图 7 2.3.1确定供油方式 7 2