毕业设计论文-半定子绕线机PLC控制系统的设计.docVIP

成人高等教育 毕业设计（论 文） 半定子绕线机PLC控制系统的设计 学 院 自动化学院 专 业 自动化 年 级 2009 姓 名 岑志章 指导教师 钟映春老师 （2011年7月） 广东工业大学继续教育学院制  摘 要 半定子绕线机主要服务于塑封电机的生产，是塑封电机生产工艺中十分重要的一个环节，伴随着塑封电机生产技术的发展，半定子绕线机的机械硬件技术及控制技术也日趋完善，随着应用技术的提高及社会化大生产的要求，对半定子绕线机的品质要求也越来越高。 本文设计了一种基于PLC+HMI+伺服+步进组成的半定子绕线机控制系统，从硬件和软件两方面阐述了此系统对半定子绕线机进行控制的设计方法。 首先，本文介绍了半定子绕线技术的发展背景，半定子绕线的原理以及现在国内外的半定子绕线机控制系统的发展现状。 其次，介绍了基于PLC+HMI+伺服+步进组成的半定子绕线机控制系的硬件设计。 再次，介绍了该系统的软件设计，包括HMI的画面组态。 最后，进行了系统的仿真和测试。 结果表明，该PLC+HMI+伺服+步进组成的控制系统能够对半定子绕线机进行各种控制，并能达到提高生产率的效果，因此该基于PLC+HMI+伺服+步进组成的控制系统设计达到了设计的要求。 关键词：半定子绕线机，塑封电机，PLC Abstract Half of the stator winding machine serves the plastic motor production, motor production process is the plastic a very important aspect, along with the plastic motor production technology, semi-stator winding machine mechanical hardware technology and control technology is maturing, With the increased application of technology and the requirements of social production, half of the stator winding machine of the quality requirements are also increasing. ???? This article is designed based on PLC + HMI + servo + step consisting of semi-stator winding machine control system, from hardware and software aspects of this system to control half of the stator winding machine design methods. ??? ?First, this paper describes the development of semi-technical background of the stator winding, the stator winding of the principle of a half and now semi-domestic and international control system of stator winding current development. ??? Second, the introduced based on PLC + HMI + servo + step consisting of semi-stator winding machine control system hardware design. ???? Again, the introduction of the system software design, including the HMI screen configuration. ??? ?Finally, for the system simulation and testing. ???? The results show that the PLC + HMI + + stepper servo control system composed of half-stator winding machine capable of a variety of c