LED 路灯特性长程测试中的误差分析.pdfVIP

11 1 LED路灯特性长程测试中的误差分析 钱可元 1 付伟 1 罗毅 1, 2 ( 1. 清华大学深圳研究生院半导体照明实验室, 广东深圳518055 ; 2. 清华大学电子工程系,集成光电子学国家重点实验室, 北京 100084) 摘要 作为户外照明产品的 LED 路灯，其可靠性必须进行现场的长程测试，而长程测试过程和 方法对测量可信度会带来很大影响。本文针对 LED 的特性，讨论了LED 路灯长程测试方法和 测试过程中可能引入的误差以及改进的方法，包括被测光源特性、测试设备、测试环境等。 关键词：大功率 LED ，路灯，寿命测试 Research on the measuring accuracy of LED Street light 1 1 1,2 QIAN Keyuan , Fu Wei , LUO Yi ( 1. Semiconductor Lighting Lab. , Graduate School at Shenzhen , Tsinghua University , Shenzhen 518055 , CHN; 2. State Key Lab. on Integrated Optoelectronics , Dept. of Electronic Engineering , Tsinghua University , Beijing 100084 , CHN) Abstract As outdoor lighting products, LED street lights, its on-site measurement of the whole device is a very important part to evaluate the reliability and other properties., while the long-term testing process and method will have a great impact on measuring credibility. In this paper, we discussed various factors which may produce errors on the measurement of LED street light’s photometric parameters and its on-site luminous degradation. These factors include the characteristics of LED, the measuring method and the measuring equipment etc. Key words: High Power LED, Street light, Lifetime measurement 1 引言 近年来,LED 光源高效、长寿、绿色环保的特点被人们所认识和重视，同时随着近 10 年来 LED 技术取得突飞猛进的发展，相关 LED 二次光学设计技术的日臻成熟，采用半导体光源替换 现有城市道路照明光源已经成为半导体照明领域的一大趋势，日益受到人们的关注。但要大量 推广 LED 路灯，就必须对 LED 路灯产品有一个统一的技术标准和测量标准，规定一些强制性的 基金项目： 国家高技术研究发展计划(863 计划)，课题编号：2008AA03A194 深圳市南山区科技研发资金资助项目，编号：2009003 22