化学系关于本科毕业论文(设计)的规范化要求.docVIP

化学系关于本科毕业论文(设计)规范化要求 (设计) 文本内容 (设计)文本内容一般包括以下几个方面： 1、毕业论文(设计) 2、毕业论文(设计) 3、毕业论文(设计) 4、前言 5、毕业论文正文或毕业设计说明书(或程序设计说明书)及工程设计图纸 6、结论 7、注释、参考文献8、符号说明 9、10、附录 英文全部用Times New Roman字体 英文题目 三号字体，加粗，居中上下空一行 正文小四号字体，行距为固定值20磅 Abstract: In this paper, multivariable predictive control algorithm and its application to the control of the environmental test device are introduced particularly. The temperature and humidity control system of the environmental test device is characterized as long time delay and severe coupling. Therefore, the routine PID control effect is unsatisfactory. In this case, the simulation of the temperature and humidity control of the environmental test device based on multivariable predictive control algorithm is made. Predictive control algorithm is one of control algorithm based on description of system’s input-output. Its three basic principles are predictive model, rolling optimization and feedback correction. It chooses unit step response as its predictive model, so that the modeling process is simplified. In addition, good control and decoupling effects could be possessed by means of selection suitable parameters. In this paper, the environmental test device is introduced briefly and the existing problems are showed. Then multivariable predictive control algorithm is presented particularly, including multivariable auto-balance system predictive control algorithm and multivariable auto-unbalance system predictive control algorithm. Next, system modeling process and corresponding system model are proposed. Further, the multivariable predictive control algorithm is applied to the temperature and humidity control system of the environmental test device. Finally, the simulation results are compared. Results of the simulation show that multivariable predictive control algorithm could be used in those multivariable system like the temperature and humidity control system of the enviro