造纸工业中纸浆配比自动控制系统程序设计.docxVIP

摘要造纸工业是一个与国民经济发展和社会文明建设息息相关的重要产业。配浆系统是整个造纸工艺流程的重要组成部分。为了达到配浆系统给定的工艺要求，保证纸浆的产量和质量，必须对配浆系统进行自动化改造。同时，该系统可以充分提供配浆系统的各种生产数据，为生产工艺的改进、管理水平的提高创造条件。本文研究了造纸工业中纸浆配比自动控制系统。整个系统结构可以分为监控程序、基于组态软件DDCRun 的控制程序与硬件及接口程序三层结构，三者相对独立运行。本文着重研究配浆系统中控制程序的设计和实现。在分析了整个系统需求的基础上提出了系统的控制目标和策略，主要包括绝干量配比控制、浓度控制和液位及联锁控制等。同时，利用动态链接库技术，将上述控制策略分解为各种算法模块并采用Visual C++语言实现。基于自编的组态软件DDCRun，实现了纸浆配比系统中的控制程序。首先，利用算法添加程序将各种算法添加到组态软件中以组成算法库；其次，利用策略组态程序搭建了配浆系统的整个控制策略；最后，采用策略执行程序以运行配浆控制策略。最后，结合本次毕业设计过程讨论了存在的不足和体会。关键词：纸浆；绝干量；配比控制；动态链接库；软件组态；DDCRun I Abstract Abstract The paper industry is the important industry which is closely linked with the national economy development and the social civilizationconstruction. Proportioning system is an important constituent portion of the entire papermaking technical process. In order to achieve the technological requirement which the proportioning system requires, ensure the output and the quality of the paper pulp, the proportioning system must carry on the automated transformation. Meanwhile this system may fully provide all kinds of production data of the proportioning system, creating conditions for the improvement of production process, and the enhancement of the management level. This article has studied the paper pulp proportioning automatic control system in the paper industry. The whole system’s software structure may be divided into three structures which are the monitor routine, based on the configuration software DDCRun control procedure and the hardware and the interface routine. The three relative independently operates. This article has emphatically studies the control procedure’s design and realization in the proportioning system. Based on the analysis of the needs of the entire system, proposes the systems control objectives and strategies, mainly included the dry component ratio control, density control, liquid level and interlock control, and so on. Meanwhile, using the Dynamic-Link Library technology, divides the above control strategies into various al