带式输送机传动系统的设计.docVIP

带式输送机传动系统的设计 Belt Conveyor Design Transmission 摘要 本文设计了一带式传输机的传动系统，其主要的传动由二级斜齿轮传动构成，在 二级齿轮传动中，高速级传动中的齿轮模数m＝2 ，小齿轮的个数为24，传动比为4.03；低速级传动中的齿轮模数m＝2.5 ，小齿轮的个数为30，传动比为3.1，通过此传动系统可以有效的将动力进行传递。 Abstract In this paper the design of the transmission area of the transmission system, the main transmission from a two helical gear drive in the two gear, the transmission of high-speed gear-modulus m = 2, the number of small gear for 21, Transmission ratio of 4.15; in the low-speed gear-drive module m = 2.5, the number of small gear for 26, transmission ratio of 3.5, through the transmission system can effe