ASTMA623–00.pdfVIP

NOTICE: This standard has either been superseded and replaced by a new version or discontinued. Contact ASTM International () for the latest information. Designation: A 623 – 00 Standard Specification for Tin Mill Products, General Requirements1 This standard is issued under the fixed designation A 623; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon () indicates an editorial change since the last revision or reapproval. This standard has been approved for use by agencies of the Department of Defense. 1. Scope MIL-STD-129 Marking for Shipment and Storage6 1.1 This specification covers a group of common require- MIL-STD-163 Steel Mill Products, Preparation for Marking ments which, unless otherwise specified in the purchase order and Storage6 or in an individual specification, shall apply to tin mill 2.3 U.S. Federal Standard: products. Fed. Std. No. 123 Marking for Shipment (Civil Agencies)6 1.2 In case of any conflict in requirements, the requirements 3. Terminology of the purchase order, the individual material specification, and this general specification shall prevail in the sequence named. 3.1 Definitions: 3.1.1 bas