三角形LED光萃取效率仿真研究-本科生毕业设计.docVIP

本科生毕业设计 毕业论文题目 三角形LED光萃取效率仿真研究 学 生 姓 名 所 在 学 院 广陵学院 专业及班级 指 导 教 师 完 成 日 期 2013年5月6日 三角形LED光萃取效率仿真研究 （广陵学院 信科8090 指导老师：朱骏） 摘 要 随着MOCVD外延生长技术和多量子阱结构的发展，人们在精确控制外延生长、掺杂浓度和减少位错等方面都取得了突破，外延片的内量子效率已有很大提高。芯片的出光效率提高LED发光效率的关键。本次研究用Tracpro70光学仿真软件，研究正三角形、等腰直角三角形和30度角直角三角形GaN基蓝光LED发光效率 关键词：发光效率，仿真，tracepro70，二极管 Abstract With the development of MOCVD epitaxial growth technology and the multiple quantum well structures, people have made a breakthrough in many aspects such as controlling the epitaxial growth, doping concentration, and reducing dislocation. The epitaxial wafer internal quantum efficiency has been greatly improved. It has been become very difficult to enhance internal quantum efficiency. The enhancement of the light extraction efficiency has been the key of efficiency of LED. In this paper, we investigate the light extraction efficiency of three kinds of LED with different underside shape and the same area. They are regular triangle, isosceles righttriangle, and right-angled triangle with a 30 degree angle. The results of simulation show that their light extraction efficiency are 18.6%, 19.0%, and 19.4%. The light extraction efficiency of the LED with the square underside and the same area is 18.2%. It is found that the LED with longer circumference has the higher light extraction efficiency. Thus, we think the enhancement of the light extraction efficiency of LED with different underside shape originates from the light extraction increase of the lateral side of the LED. Keywords: Light extraction , simulation, tracepro70，LED目 录 摘 要 1 目 录 2 序 言 1 LED的光输出效率 2 LED芯片简介 实验建模 构建模型框架 5 LED参数设置 插入观察面 实验仿真 1正三角形LED的仿真 1等腰直角三角形LED的仿真 1含30度角直角三角形LED的仿真 1仿真结果 20 ⒍ 结 21 ⒎ 参考文献 1 ⒏ 致谢 2  序 言 过去几十年中，发光二极管(Light Emitting Diodes， LED)器件的研发取得了多项重大突破，内量子效率已经达到较高的水平。由于LED发光器件具有体积小、电光转换效率高、固态封装耐冲击等优势，因