芦苇打包机机构设计与仿真.docVIP

摘 要 芦苇打包机是用于对芦苇、水稻秸秆进行打包为下一步工序做准备的重要机械，不仅简化了原材料的包装运输问题，也成为当今世界能源危机的新课题。该机是由压缩机构、送出装置和机架构成。压缩机构通过上压板将散碎芦苇杆约束到压缩槽内，到预定位置。再由一级压头对一次预压的芦苇杆进行压缩打包。送出系统采用液压杆运送的方式，这种方式方便、实用、可靠。本机通过液压动力机构很容易得到大压力，能在工作行程的任何位置进行满负荷的挤压工作，芦苇杆变形稳定，挤压出的束块密度高，机构的通用简单，液压元件功率损失小、节省能源、标准化程度高、易更换也增加了机器的可维护性，打包机的成本不高，在农村市场可以很好的推广。本设计收集和了液压机构、运动仿真、有限元分析软件的资料。根据任务要求研究方案，提出可行性机构并加以分析比较，在此基础上通过优化设计分析最终确定方案。对打包机三大系统的各部分设计计算和校核。?关键字：芦苇 打包机 液压? 【Abstract】Balers are used for reed, rice straw packing in preparation for the next major mechanical processes, not only simplifies the problem of packaging and transportation of raw materials, energy crisis the world has become a new topic. This machine is a compression body, sending devices and rack composition. Compression mechanism on the plate will be scattered and fragmentary by binding to the compression tank reeds, to the intended location. And then by a pressure head of a pre-compression pressure reed package. Delivery system uses hydraulic rod sent the way, this approach convenient, practical and reliable. Agencies through the hydraulic power unit is easy to get great pressure and can travel anywhere in the work carried out work at full capacity of the extrusion, deformation and stability reeds, squeezing out the beam block density, body generic simple power loss of hydraulic components small, energy saving, high degree of standardization, easy to change also increases the maintainability of the machine, packing machine cost is not high, in the rural market can be a good promotion. The design of the collection and a hydraulic mechanism, motion simulation, finite element analysis software information. Research program based on mission requirements, propose and analyze the feasibility of comparing institutions, on the basis determined by optimizing the design of the final program. Three of the packer system design calculations and check each part.?Keywords: reed packer hydraulic? 目 录?　引言 1?　0.1课题内容概述 4?　0.1.1设计理念 4?　0.2设计前景分析 4?　0.3设计任务及工作安排 5?　第一章