某小学综合楼电气系统设计 安徽建筑大学毕业论文.docVIP

安徽建筑工业学院 毕 业 设 计 论文 系 (院) 电子与信息工程学院 专 业 建筑电气与智能化 班 级 08建筑电气(1)班 学生姓名 唐 晏 梅 学 号08205060123 课 题 某小学综合楼电气系统设计 --强电系统设计(二) 指导教师 张 鸿 恺 2012年6月6日 摘要 该论文主要阐述了依据国家规范对某小学综合楼进行电气设计的过程及设计思想。设计内容包括照明系统设计,低压配电系统设计,以及防雷接地系统设计。在照明系统的设计中,本着节能的原则,选择荧光灯为光源,通过照度计算,确定最佳光源数,合理布置灯具,为学生和老师们创造了一个良好的学习、工作环境。在低压配电系统的设计中,根据负荷等级,确定供电方式及系统方案。采用需要系数法进行负荷计算,并按照规定选择保护电器、电线电缆,达到安全用电和节约能源的目的。在防雷接地设计中,通过计算将本建筑物归为第三类防雷建筑物,并按照国家规范进行设计。 本次毕业设计目的是通过设计实践,综合运用所学知识,锻炼独立分析和解决建筑电气设计问题的能力,为未来的工作奠定坚实的基础。 关键词:照明系统,低压配电系统,防雷接地系统 AbstractThis paper describes a primary building school based on national norms on the main teaching building for the electrical design process and design.The design elements include a lighting system design, low-voltage distribution system design, as well as lightning protection and grounding system design In lighting design, in line with the principle of energy conservation, choose fluorescent lamps as light source, through the illumination calculation to determine the optimum number of sources, rational arrangement of lamps, for students and teachers to create a good learning and working environment.In the low-voltage distribution system, according to the load level, determine the power supply and system solutions. Coefficient method using load calculation required, and in accordance with the provisions of protection of electrical options, wire and cable, to secure electricity and energy savings. In the lightning protection and grounding design, this building will be classified by calculating the third type of lightning protection for the buildings, designed in accordance with national normsThe purpose of this graduation project is to design practice through the comprehensive use of the knowledge, exercise independent analysis and problem solving capacity building electrical design for the future work laid a solid foundation Key