高温密闭环境下基于MSP430 的一种多路微应变遥测系统的设计.pdfVIP

1 电 子 测 试 高温密闭环境下基于MSP430的 一种多路微应变遥测系统的设计 王 峰 刘 宾 （中北大学信息探测与处理技术研究所） 摘要：针对传统静态情况下研究连杆的力学特性时，并不能在其运动过程中实时反映其受力状况，根据应变遥测的原理，提出 一种多路微应变遥测系统的设计方案。该设计采用 MSP430F149 系列单片机为主控，24L01 为主芯片的无线收发模块，将 4 路 数据通过无线模块传至上位机。本系统PCB板宽度为1.5cm，长度为5cm，工作电流小于20mA，测量精度达到2%，该系统具有体 积小、低功耗、精度高、抗冲击及操作方便等特点。本测量方案可以灵活实现模块化，所设计的同一块PCB可以移植到许多电阻 应变传感器的设计中去。 关键词：遥测；单片机；无线模块 中图分类号：TP368.1；TN98 文献标识码：A Design of a multi-channel micro-strain telemetering system which is based on the MSP430 under the environment of high temperature Wang Feng，Liu Bin （Institute Of Signal Capturing＆Processing Technology，Taiyuan 030051，China） Abstract ： For traditional static，it cannot be real to reflect the state of stress during its movement in time when we study the mechanical properties of connecting rod，and then，according to the principle of strain telemetering，we put forward a kind of multi-channel micro-strain telemetering. This design uses MSP430F149 series single-chip computer for the master，24L01 as the main chip for wireless transceiver module，4-channel data for the host computer through the wireless module system designs. For this system， the width and length of PCB are 1.5 cm and 5 cm. Its working current is less than 20mA and measurement precision reaches 2%.For whose features are small size，low power consumption，high precision，idmpact resistance and ease of operation etc. The scheme of this measurement can be able to flexibly realize modularity，and the same piece of designed PCB can be removed to many designs of resistance strain sensor. Keywords ： Telemetering，Single chip microcomputer，Wireless module 0　引言 一些动态分析，比如模拟连杆在运动过程中的的受力