表面贴装设备与SMT缺陷分析毕业设计.doc

毕业设计（论文） 课题名称：表面贴装设备与SMT缺陷分析 任务书 一、课题名称：表面贴装设备与SMT缺陷分析 摘要 SMT缺陷。对于初学者有着良好的借鉴作用。自80年代SMT进入中国后，经过二十多年的发展，SMT俨然已经是中国电子装联技术的主流技术，在中国得到了空前的发展。全球EMS(电子合约制造服务)前50强企业几乎都在中国直接或间接设有工厂，为全球电子信息产业的客户提供全方面的电子制造服务。可以说，中国早已成为全球最大的SMT产业聚集地。目前，先进的电子产品，特别是在计算机及通讯类电子产品，已普遍采用SMT技术。国际上SMD器件产量逐年上升，而传统器件产量逐年下降，因此随着进间的推移，SMT技术已越来越普及。伟创力（珠海）电子有限公司SMT生产车间阐述Abstract Since the 80 s in China SMT, after 20 years of development, China has is peremptory SMT technology with united the mainstream of electronic technology, in the Chinese got the unprecedented development. Global EMS (electronics manufacturing service contract before almost 50 strong enterprise in China directly or indirectly with factories, for global electronic information industry customers with all the aspects of the electronic manufacturing services. Can say, China has become the worlds largest SMT industry colony. At present, the advanced electronic products, especially in computer and communication electronic products, it has widespread use of the SMT technology. International SMD device production is rising year by year, and traditional device production declined year by year, so with the passage of between into, SMT technology has become more and more popular. In order to make sure our graduates more quickly meet SMT industry, this paper through the flectronics Co., LTD. ectronics Co., LTD. SMT production workshop, with its B11 C7 production line on the second floor as the theory basis, this paper expounds the SMT production line production processes, and the basic operation of the SMT equipment and principle, and indicates that the common SMT defects. For beginners is a good reference. Keywords: SMT ；printing machine；placement machine ；SMT defects ；solution 目 录 摘要 I Abstract II 第一章 绪论 1 1.1 SMT介绍 1 1.2 SMT基本工艺构成要素 2 第二章 印刷设备的介绍与缺陷分析 4 2.1 印刷机的介绍 4 2.2 印刷机引起的缺陷分析 6 2.2.1 印刷偏移 6 2.2.2 锡连 8 2.2.3 炉后空洞 8 2.2.4 焊膏图形拉尖，有凹陷 9 2.2.5 锡膏太多 9 2.2.6 锡膏量不足 10 2.2.7 塌陷 11 第三章 点胶机的介绍与缺陷分析 12 3.1 点胶工艺的介绍 12 3.1.1 设备介绍 12 3.1.2