本科毕业论文外文翻译-A geometric approach for injection mould filling simulation.docVIP

xxxxx大学毕业设计（论文） 外文文献 学 院 xxxxxxxxxxxxxxxxx 专业班级 xxxxxxxxxxxxxxxxxxxxx 学生姓名 xxxxxxxxxxxxxx 指导教师 xxxxxxxxxxxxxxxxxxxxxx A geometric approach for injection mould filling simulation C.K. Au* School of Mechanical and Production Engineering, Nanyang Technological University, 50 Nanyang Ave, 639798 Singapore Received 15 March 2004; received in revised form 7 June 2004; accepted 15 June 2004 Abstract This paper investigates a geometric technique for generating flow fronts arising from a point gate, in a bounde