日产12000平方米玻化砖油烧辊道窑设计（有全套图纸）.docVIP

摘要 关键词：辊道窑、节能 本设计说明书对所设计的日产12000平方米玻化砖辊道窑加以说明。 窑顶采用耐热钢穿轻型吊顶砖的吊顶结构，为了降低全窑的热损失减小单位产品热耗，全窑均采用轻质耐火材料。燃料用0#柴油，采用高速调温烧嘴对制品进行裸烧来强化窑炉内部传热，同时对高速烧嘴可进一步调节使窑内温度均匀提高成品率，从而达到节能的目的。 为有效利用烟气热，在窑炉前段采用集中排烟的方式，另外在缓冷段采用抽热空气的方式来冷却制品，对热烟气也可加以利用。 对全窑的控制采用计算机自动控制来实现，既提高了产品的成品率又降低的工作人员的工作强度，降低了生产成本。 本设计特点：在提高产品质量的同时降低单位产品热耗，实现陶瓷行业上的“绿色、环保、节能”。 全套CAD图纸，联系Q 174320523 各专业都有 Abstract Key word: The roller kiln, energy conservation This design is dayly produces12,000 square meter wood grain brick roller kiln . The crown uses the high-temperature steel to put on the light suspended ceiling brick the suspended ceiling structure, in order to reduce the entire kiln the heat lose to reduce the unit product to consume hotly, the entire kiln uses the light quality fire-proof material. Because the fuel uses the 0 # diesel oil is the clean fuel uses the high velocity modulation warm burner nozzle to carry on the bare fever to the product to strengthen the kiln stove interior heat transfer, simultaneously may further adjust to the high speed burner nozzle makes in the kiln the temperature to enhance the rate of finished products evenly, thus achieves the energy conservation the goal. Is hot for the effective use haze, the section selects the method in front of the kiln stove which the disperser discharges fume, moreover uses in the slow cold section pulls out the hot air the way to cool the product, also may perform to the hot haze to use. Uses the computer automatic control to the entire kiln control to realize, both enhanced staffs working strength which the product rate of finished products and reduces, reduced the production cost. This design characteristic: While improves the product quality to reduce the unit product to consume hotly, realizes in the ceramic profession “the green, the environmental protection, the energy conservation” 目 录 前 言 7 任务书 8 1 窑体主要尺寸的确定 9 1.1 进窑砖坯尺寸 9 1.2 内宽的确定与排砖方法 9 1.3 内高的确定 9 1.4 烧成制度的确定 10 1.5 窑长及各带长的确定 10 1.5.1 窑长的确定 11 1.5.2 各带长的确定 11 1.5.3 辊道窑窑头、窑尾工作台长度 12 1.5.