三通阀2-φ17双头立式孔加工专用机床设计【有全套图纸】.docVIP

全套图纸，加174320523 各专业都有 毕业设计说明书 题目名称：三通阀2-?17双头立式孔加工专用机床 2011年 05月 三通阀2-φ17双头立式孔加工专用机床设计 摘要： 随着自动化生产能力的提高，现代工厂中出现需要 三通阀2-φ17双头立式孔加工专用机床设计摘要： 随着自动化生产能力的提高，现代工厂中出现需要 Title Double three-way valve 2-φ17 hole processing machine tools for the design of vertical Abstract With automatic production capability is improved, the modern factories in need of modular machine tool, the combination of more occasions based on general parts, match with workpiece specific shape and process design of special components and fixtures, composed of semi-automatic or automatic special machine. It usually adopts the multiaxial, knife, processes, and multi-faceted or multistage and processing, production efficiency than general machine high several times or more. Due to the common parts have standard series, can according to the combined flexible configuration, can shorten the cycle of design and manufacture. Therefore, the combination machine has the advantages of low cost and high efficiency, in large, mass production is widely used, and the automatic production line can be used to composition. This paper introduces a special vertical combination machine tools designed for Three-way valve face 2X φ 17 holes on the surface drilling this specific processes. In this design, all the standard parts selection based on the carefully data calculation, and according to the characteristics of the structure by processing components, precision machining parts size, surface roughness, and the localization way, clamping technology and processing process using tools, cutting dosages as productivity, the structure design of reasonable spindle box. Keywords：combined machine tool, production efficiency, clamp, drilling 目 录 1 引言 3 1.1组合机床概述 3 1.2该课题研究的目的和意义 3 1.3组合机床发展史 3 1.4国内外该研究技术现状 4 1.5发展趋势 5 1.6本课题研究的基本内容 5 2 多孔钻组合机床总体方案设计 6 2.1 零件分析 6 2.1.1零件的技术要求 6 2.1.2结构方案分析和定方案的选择 6 2.1.3选择定位基准的原则及应注意的问题 6 2.1.4确定夹压位置应注意的问题 7 2.2工艺分析 7 2.3确定机床的配置形式 7 2.3.1不同配置形式组合机床的特点及适应性 8 2.3.2不同配置形式组合机