电容座塑模结构设计与制造设计毕业设计.docVIP

毕业设计（论文）报告 题 目电容座塑模结构设计与制造 系 别 中德机电学院 . 专 业 模具设计与制造 . 班 级 0704 . 姓 名 胡万田 . 学 号 070001 . 指导教师 舒冰 . 2010年 4 月 摘要 在本次设计中，根据零件的特点采用了侧型芯机构。由于塑件尺寸较小，所以采用了一模四腔注塑方式，本次也采用了单分型面结构。 零件的特点是侧面有空，上卖弄有凹槽，四周有圆角【形状如图（1-1）】，给确定分型面、确保塑件精度及防止塑件在分型面上溢边带来了困难。 根据零件形状推出机构由传统的推杆改进为推片【见总装图】，分型面改进为台阶式分型。在本次模具设计中有较多的数据计算，如成型零件尺寸的计算、形位公差的计算、确定注塑机时的校核计算等。根据所选的注塑机要确定模具的总模厚，还有相关数据的校核，比如锁模力、注射压力。本次设计还对浇口、冷却方式和排气方式进行了说明、阐述。本次设计模具总体结构紧凑、论文思路严谨，对大学三年所学理论进行了系统的回顾与总结。 由于本人设计水平有限，缺点和错误在所难免，请各位老师批评指正。 关键字：一模四腔 侧型芯 单分型面 Summary In this design, according to the characteristics of components used side core institutions. As the size of small plastic parts, so using a four-cavity injection mold method, also used this single sub-surface structure. Part is characterized by the side of the time, there are grooves on the show off, surrounded by a rounded 【Shape Figure (1-1)】, to determine the parting line to ensure precision plastic parts and plastic parts to prevent overflow in the side of the surface type to be difficult. The shape of the part by the introduction of institutions for the promotion of traditional putter improve chip assembly map】 【see, sub-surface improvements for the stepped type. In this mold have more data of such as forming part of the calculation of size, shape and position tolerance calculation, to determine the time of injection molding machine check calculation. Confidential based on the selected injection mold to determine the total thickness of the mold, as well as related data verification, such as clamping force, injection pressure. This design is also on the gate, cooling and exhaust methods are described, explained. The compact design of the overall structure of mold, the paper thought strict theory of the university three years, conducted a systematic review and summary. As I design is limited, shortcomings and mistakes are bound to please the teacher criticized the correction. Keywords: a four-cavity mol