AZ91D镁合金表面低温扩散渗铝层的组织与性能.pdfVIP

20 12 2010 12 Vol.20 No.12 The Chinese Journal of Nonferrous Metals Dec. 2010 1004-0609(2010)12-2269-05 AZ91D ( 200240) AlCl -NaCl(380 )AZ91D 3 X X 3.5%()NaCl AZ91DAZ91D Mg Al Mg Al 2 3 17 12 AZ91D3.5%()NaCl AZ91D TG178 TG146.2.2 A Microstructure and properties of lower-temperature diffusion aluminizing coating on surface of AZ91D Mg alloy ZHONG Cheng, LIU Lei, WU Ya-ting, HE Mei-feng, SHEN Bin, DENG Yi-da, HU Wen-bin (State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240, China) Abstract: The aluminizing of AZ91D Mg alloy by AlCl -NaCl molten salts at a lower temperature of 380 were 3 investigated, and a diffusion alloyed layer was prepared. The microstructure and composition of the diffusion alloyed layer were studied by optical microscopy, scanning electron microscopy, energy dispersive spectrum and X-ray diffractometry. The nano-hardness of the alloyed layer was studied by nanoindentation. The corrosion resistance of the treated AZ91D Mg alloy was evaluated in 3.5% (mass fraction) NaCl solution by electrochemical impedance spectroscopy and potentiodynamic polarization. The results show that a continuous and dense alloyed layer can be formed on the surface of the AZ91D Mg alloy by aluminizing in molten salts at low temperature. The aluminum-alloyed layer consis