寺河矿300万t新井设计.docVIP

摘 要 本设计包括三个部分：一般部分、专题部分和翻译部分。 一般部分为寺河矿300万t/a新井设计。寺河煤矿位于山西省晋城市西面，交通便利。井田走向（东西）长约5.77km，倾向（南北）长约6.30km，井田总面积为36.24km2。主采煤层为3号煤、9号煤，平均倾角为5°，煤层平均总厚为5.30m。井田地质条件较为简单。 井田工业储量为38784万t，矿井可采储量27352万t。矿井服务年限为70.13a，涌水量不大，矿井正常涌水量为75m3/h，最大涌水量为120m3/h。矿井瓦斯涌出量较高，为高瓦斯矿井。 井田为双斜井单水平开拓。大巷采用胶带运输机运煤，辅助运输采用无轨胶轮车设备。矿井通风方式为两翼对角式通风。 矿井年工作日为300d，工作制度为“四六”制。 一般部分共包括10章：1.矿区概述及井田地质特征；2.井田境界和储量；3.矿井工作制度及设计生产能力、服务年限；4.井田开拓；5.准备方式-盘区巷道布置；6.采煤方法；7.井下运输；8.矿井提升；9.矿井通风与安全技术；10.矿井基本技术经济指标。 专题部分题目是柱状图绘制软件的编制。主要采用AutoCAD的ActiveX技术及Visual Basic 6.0来编制软件。 翻译部分主要内容为关于锚杆的分析模型，英文题目为：Analytical models for rock bolts。 ABSTRACT This design includes of three parts: the general part, special subject part and translated part. The general part is a new design of Sehe mine. Sehe mine lines in West of JinCheng in ShangXi province. The traffic of road and railway is very convenience to the mine. The run of the minefield is 5.77 km ,the width is about 6.30 km，well farmland total area is 36.24㎞2.The three and nine is the main coal seam, and its dip angle is 5 degree. The thickness of the mine is about 5.30m in all. The proved reserves of the minefield are 387.84 million tons. The recoverable reserves are 273.52 million tons. The designed productive capacity is 3 million tons percent year, and the service life of the mine is 70.13 years. The normal flow of the mine is 75 m3 percent hour and the max flow of the mine is 120 m3 percent hour. The mineral well gas gushes the deal higher, for high gas mineral well. The well farmland is a single level in an inclined well to expand. The working system “four-six” is used in the Sehe mine. It produced 300d/a. This design includes ten chapters: 1.An outline of the mine field geology; 2.Boundary and the reserves of mine; 3.The service life and working system of mine; 4.development engineering of coalfield; 5.The layout of panels; 6. The method used in coal mining; 7. Transportation of the underground; 8.The lifting of the mine; 9. The ventilation and the safety operation of the