1000头气流纺5万锭1152台布机棉纺织联合工厂设计正文.doc

1000头气流纺5万锭1152台布机棉纺织联合工厂设计 摘 要 根据给定的任务书设计一个拥有五万锭细纱，台有梭织机的棉纺织联合厂，产品方案如下： 20% 2. 114.3×523.5×283×14.5×14.5JT/C(65/35) 涤/棉府绸 30% 30% 3. 114.3×283×248×28×28 哔叽 20% 20% 4. 114.3×283×283×27.8×27.8 细平布 30% 30% 5. 1000头气流纺 售纱：58tex OE纱，余锭 本毕业设计为模拟设计一个棉纺织联合工厂，包括工艺流程选择、设备选型与配备、车间布置与机器排列等，还介绍了原料选择、厂址选择、厂区总平面布置、输浆管路设计和除尘设备等。设计内容有工作图纸和产品，设计要点如下：厂址和地理位置的设计 本设计的厂址位于市，按照环境和经济条件，车间的布置和机器排列如图1。工艺设计 按照教学计划中的产品方案，选择了相应的工艺和进行相应的机器数量计算。车间布置和机器排列 在保证产品生产和运输的基础上，生产车间分成了不同的部分，机器排列如图2。其它设计 包括车间结构，柱网参数，空调，除尘，用电和劳动定员等。图纸 （1） 车间机器排列图 （2） 厂区总平面布置 （3） 织机地脚图 The design of Cotton textile mill with 50,000 spindles 、1000 spinning airstream 、1152 shuttle loom Abstract According to the task given by Teacher Yan Lin, I will design a cotton textile mill which contains :50 thousand Spain-yarns, 1000 spinning airstream ， 1152shuttle looms. The products are as follows: （1）（）（3）（）ell the remain yarns This graduation project is to design a cotton mill, which includs process selection, equipment selection and equipment ,plant layout and machinery arrangement and so on, but also introduce the selection of raw material , site selection, general layout of the factory, transport slurry pipeline design and dust transport equipment etc. After accomplish the project,we can integrate the basic theories, ramp up courses and its knowledge or skills,analyse and solve the technical matters about the speciality,which develops our capacity for independent thinking and scientific working methods. The contents of the work of design include drawings and product, the design features are as follows: The selected of the mill site and the general layout.: Our planned mill is located in ChiZhou City, AnHui Procvince. In accordance with the environmental and economic conditions, the plant layout is shown in Figure 2. The technical designing: According to the scheme of products in the teaching programs, we select the products and collate the ma