部分楼板变形时斜交建筑结构的弯扭耦合分析论文打印稿正文.docVIP

摘 要 现代高层建筑的发展突飞猛进，日新月异。工程中越来越多的用到高层复杂建筑结构形式。其中一种常见的结构形式是各抗侧力单元斜向布置的斜交结构。本文研究的斜交结构由框架、剪力墙和薄壁筒三种抗侧力单元斜向布置组成。 本文研究在考虑部分楼板变形情况下斜交建筑结构的弯扭耦合分析。内容包括斜交结构的协同分析、二阶分析和自由振动分析。采用沿高度连续化的方法，将楼板在平面内划分为两种情况，薄弱区域为弹性的，其余区域为刚性的。每个刚性区域视为一个子结构，整个结构由若干个子结构和弹性楼板组成。将组成结构的各抗侧力单元视为具有弯曲、剪切和扭转变形的薄壁梁，从而建立斜交结构的计算模型。 从能量的观点出发，推导出问题相应的拉格朗日函数和拉格朗日方程，通过引入对偶变量即广义位移和广义力，从而得到在辛体系中的哈密顿对偶方程。求解方程则采用两端边值问题的精细积分法，求出各个问题的相应数值解，并将计算结果与文献中计算结果进行对比，验证了本文方法是正确可行的。本文将问题导入哈密顿对偶求解体系来分析，整个过程概念清晰，计算机编程计算，且精度能满足工程需求斜交结构；；弯扭耦；哈密顿对偶体系；精细积分法 Abstract Modern high-rise building developed rapidly with each passing day. More and more projects use high-rise complex building structure. One common structure is skew combined structure whose lateral force units are sideling laid. In this paper, the skew combined structure is composed of frame, shear walls and thin-walled tube of three lateral force unit composed of diagonal layout. In this paper, we do coupled bending and torsion analysis of skew combined structure considering partial floor deformations. Including cooperating analysis, second-order analysis and free vibration analysis. By use of the uniformization technique, the floor in the plane is divided into two cases, the weak area is flexible, and the remaining area is rigid. Each rigid region is treated as a sub-structure, the whole structure consists of several sub-floor structure and the elastic component. The lateral force unit formed the structure is treated as a thin-walled beam which has bending, shear and torsional deformation, thereby establishing the structure of model bias. From the energy point of view, the corresponding Lagrangian function and Lagrange equations of the problems are derived. By introducing the dual variables which are displacements and forces generalized, resulting in the Hamiltonian dual equation in the symplectic system. Solving the boundary value equation is applied at both ends of the precise integration method obtained the corresponding numerical solution of various problems. The results