减速机机体零件机械加工工艺及专用夹具设计说明书.docVIP

摘 要 Abstract Enable producing the target in process of production (raw materials, the blank , state of quality and quantity on part become always ) take place direct course of change ask craft course, if the blank is made, machining, heat treatment , assemble etc. and call it the craft course. In the course of making the craft , is it confirm every erector location and worker step that process need this of process to want, the locomotive of processing , this process , and the entering the giving amount of the lathe, cut depth , the rotational speed of the main shaft and speed of cutting, the jig of this process, the cutter and measuring tool, a one hundred sheets of number of times still leaves and a one hundred sheets of length leaves, calculate basic time of this process , auxiliary time and service time of place of working finally. This box machine element is typical, the manufacturing process and tooling design of it is typical.The structure of this box machine element is complicated, the machine element’s blank adopt casting shape. In the process of manufacture, in order to ensure the location datum accurate and unity, I adopt the manufacturing line from face to hole.In order to clear away the influence for machining accurate of internal stress, cutting force, clamping force, heat in cutting from coarse manufacturing, the whole manufacturing process is made of coarse and accurate manufacturing. Parts were processed through the analysis of the complete machining process design and the manufacturing processes for mobile time calculations. According to the box components and the function and structure, the use of the knowledge positioning clamp completed the fixture design. Key words:The process;worker one;workers step;the surplus of processing 目 录 摘 要 III Abstract IV 目 录 V 1 绪论 1 1.1 本课题的研究内容意义 1 1.2 国内外的发展概况 1 1.3 本课题应 1 2 零件工艺的分析 2 2.1 确定毛坯的制造形式 2 2.2 箱体零件的结构工艺性 2 3 拟定箱体加工的工艺路线 3 3.1 定位基准的选择 3 3.2 加工路线的拟定 3 4 机械加工余量，工序尺寸及毛坯尺寸的确定 6 4.1 机体 6 4.1.1 毛坯的外廓尺寸：