塑料茶杯注塑模具毕业设计.doc

塑料茶杯注塑模具设计 摘要：近年来，我国工业的高速发展对模具工业，尤其是塑料模具提出了越来越高的要求，2004年，塑料模具在整个模具行业中所占比例已上升到30%左右，据有关专家预测，在未来几年中，中国塑料模具工业还将持续保持年均增长速度达到10%以上的较高速度的发展。国内塑料模具市场以注塑模具需求量最大，其中发展重点为工程塑料模具。 关键词：塑料模具,注射成型,模具设计  Injection mould design for the plastic cup Abstract In recent years, Chinas appliance industry in the development of high-speed tooling industry, in particular the plastic mold of the ever-increasing demands. In 2004, the plastic mold industry in the entire Die share has risen to 30% According to the experts predict that in the next few years, China plastic mold industry will continue to maintain an average annual growth rate of 10% over the high rate of development. Domestic market to plastic mold injection mold greatest demand, which focused on the development of engineering plastics die. Plastic injection molding is an important method, which is primarily applicable to thermoplastic plastic molding, Molding can be a complex shape of precision plastic parts. Is the topic of small Cup as a design model, the injection mold-related knowledge as a basis for elaborate plastic injection mold design process. The design of Cup for the injection mold design, the use of software PROE plastic parts for the solid modeling, Plastic Parts of the structure analysis for the process. Defined the design, determine the injection molding process as well as some specific details of the calculation and verification. The design of such a structure can be used to ensure reliable Die work to ensure that the other parts of the tie. Finally, a set of auto mapping mold parts and assembly plans. The subject of Cup injection mold design, and to consolidate and deepen the learning, has been fairly satisfied with the results. Keywords : plastic mold, injection molding, Mold design 目 录 中文摘要 关键字 1 英文摘要 关键字 2 第一章 引 言 3 第二章 塑料成型制品的分析 6 2.1制品的设计要求 6 2.2制品的生产批量 6 2.3制品的质量和体积 6 第三章 塑料性能 7 3.1 聚乙烯塑料的材料特性 7 3.2 聚乙烯塑料的成型特性 7 3.3 聚乙烯塑料的成型工艺参数 8 第四章 注射机的选用及校核 9 4.1注射机的初选 9 4.2 型腔数量的确定 9 4.3 注射机有关工艺参数的校核 10 4.3.1最