中厚板板形仪长度检测系统毕业设计.doc

摘 要 中厚板（厚度的钢板Labview软件构建整个系统的检测程序。随着系统的运行能立即得出所需要的关键数据以便用来分析。以下是论文的详细内容： 本章主要是介绍中厚板及板形仪的定义。国内外中厚板板形仪的研究现状和发展趋势，以及中厚板长度检测的研究意义和价值。根据其发展现状和研究的重要性，设计一套完整的长度检测系统。 本章根据研究所需设计检测仪系统的整体构架，其中包括传感器，多普勒测速仪的位置安装定位。重点介绍长度检测系统的工作原理。 本章论述检测系统的组成和相关参数，着重介绍多普勒激光测速仪工作原理。 本章主要介绍运用Labview构建程序框图和前面板。通过运行虚拟程序得到相应数据，并对数据进行分析。 使用Matlab软件编写程序用来处理测量所得数据。 本章主要是总结研究过程中所遇到的问题和对构建的程序框图所产生的一些不足，提出解决之道和展望未来研究方向。 关键词：长度检测 多普勒测速 程序框图 总结 Abstract Steel plate is often used as a base material in our industrial process .We need a great quantity numbers. It plays a very important role. So we want have the quality of steel plate by a very high standard. Include its size measurement such as length, width and flatness, etc. The length is a key quality indicator, has a significant impact in production lines and product application. In recent years, with the continuous development of Chinas modernization, Demand for steel plate and a sense of quality we also put forward higher requirements. Length detection system give the follow-up series of steel plate detection system provides key data support will directly affect the latter part of the quality for the product. Cold-rolled plate in the conveying speed of the rollers is a very critical detection process data, the accuracy of speed measurement is directly affects the accuracy of the contour detection. This study is the use of a new type of non-contact speed is very different from the traditional measurement methods. It is measure speed by Doppler velocimetry and Multiplied by the measurement time that can have the measuring length. At the same time, determines all latitude length and an average length, maximum length and minimum length. Due to limited conditions, experiment using Labview software to build the entire system testing procedures. With the operation of the system can immediately draw the critical data needed to be used. Here are the details: Chapter 1, Introduced the steel plate and Shapemeter definition. Home and abroad the steel plate Shap