蒸压轻质混凝土强度与保温性能外文文献翻译英文原文.docVIP

132 Vol.26 No.1 YANG Ruochong et al: Thermal Insulation and Strength o… DOI 10.1007/s11595-011-0184-6 Thermal Insulation and Strength of Autoclaved Light Concrete YANG Ruochong , ZHU Jipeng , WU Zhishen , WU Zhiren , LI Min , PENG Changhai 1 2 3* 4 3 5 (1. School of Transportation, Southeast University, Nanjing 210096, China;2. Department of Civil Engineering, The Hong Kong University of Science Technology, Hong Kong; 3. Institute of Urban Engineering Science Technology, Southeast University, Nanjing 210096, China; 4. Institute of ATK Environment Engineering, Yixing 212004, China; 5. School of Architecture, Southeast University, Nanjing 210096, China) Abstract: The primary objective of this study was to develop an autoclaved light concrete (ALC) material with ultra-thermal insulation property and to investigate the relationship between its physical characteristics and mechanical properties. Through tests of dry bulk density and compressive strength, relationship of physical characteristics and mechanical properties of samples were studied, resulting in a material with ultra-thermal insulation property. Scanning electron microscope (SEM) and energy-dispersive X-ray spectroscopy (EDX) were applied to analyze the micro-morphology and elemental composition of samples. To identify the product phases, X-ray diffraction (XRD) was en- gaged. The test results showed that compressive strength and thermal coefficient were reduced with the increasing of aluminum powder within the mixtures. As a result the optimal thermal coefficient and compressive strength of samples were improved to 0.061 W/(m·k) and 1.2 MPa, respectively. SEM, EDX and XRD analyses showed that calcium silicate hydrate and tobermorite crystal were main re- sultant phases. Key words: autoclaved light concre