简支变连续桥梁毕业设计（广西柳江大桥设计）.doc

河 北 工 业 大 学 毕业设计说明书 作 者： 学 号： 学 院： 系(专业)： 题 目： 指导者： 评阅者： 2013年 5 月 30 日 毕业设计（论文）中文摘要 广西柳江大桥设计 摘要： 广西柳江大桥位于广西省柳州市，横跨柳江，本设计根据当地地形条件与经济技术条件，选定预应力连续梁桥为设计方案，梁截面采用T型截面，施工方法采用先简支后连续，此种施工工艺具有简便，施工速度快等优点。本设计桥梁结构计算采用桥梁博士，建立单片边梁模型，应用荷载横向分布系数原理，将空间受力模型合理的转化为平面模型，得到单片边梁的受力情况。由于边梁受力最不利，中梁按边梁受力配置钢束是安全的。通过使用桥博调束和抗剪模块，完成对边梁的钢束位置调整和抗剪设计。横隔梁设计与主梁设计类似。 由于行车道板计算简单，使用手算完成。将完成的计算数据整理成计算书，绘制设计图纸。 关键词： 预应力连续梁桥 简支变连续 桥梁博士 毕业设计（论文）外文摘要 Title The design of Guangxi the Liujiang River Bridge Abstract Guangxi the Liujiang River bridge is located in Guangxi Province, Liuzhou City, across the Liujiang River, this design according to the local terrain conditions and economic and technological conditions, selected for the design of prestressed continuous beam bridge, girder section by T type section, the construction method of the simply supported-continuous, this construction technology has advantages of simple, fast construction speed. Calculated using the bridge, the bridge structure design, establishment of single edge beam model, application of load transverse distribution coefficient of principle, the spatial force transformation model of plane model is reasonable, single edge beam stress. Because of the most adverse side beams, beam side girder steel beam configuration is safe. Through the use of bridge modulation beam and shear module, to complete the edge beam steel beam position adjustment and shear design. Similar design of cross beam and girder design. Because the carriageway plate is simple in calculation, the use of hand complete. Finishing will be calculated data into account, drawing design drawings. Keywords：Prestressed concrete continuous beam bridge Simply-supported into continuous Dr. Bridge 目 次 1． 绪论