处理水量为60000m3-d的城市生活污水毕业设计+外文.docVIP

  • 364
  • 0
  • 约5.75万字
  • 约 86页
  • 2017-09-10 发布于广东
  • 举报

处理水量为60000m3-d的城市生活污水毕业设计+外文.doc

摘 要 我国来两方工业发标工业废中处设施严经处进造成环工业废来经过理虽减无减质51%以上。 本设计处为m3/d的城市生活污水,设计针对运稳A2/O活性污泥法工艺处A2/O工艺环条厌条CODNB)能被开环断链N、P、有机碳被同时对CODNB-时脱过摄脱NH3-N应这则脱厌联A2/O Abstract Our major water pollution from two aspects, one is the industrial development of industrial wastewater discharge exceeds bid, urbanization and urban sewage discharge due to serious lack of facilities for central treatment of sewage treatment, without directly into the water environmental pollution. In recent years, through the governance of industrial wastewater is reduced, but the city life sewage grew more and more, the water pollution has kaken up to 51%. The design requirements for 60000m3/d water treatment of municipal sewage, the design scheme for stable operation effective A2/O activated sludge process urban sewage. A2/O process due to different environment conditions, the different functions of microbes, together with the organic anaerobic, hypoxia conditions, not part of the organic biological catabolic (CODNB) can be open or broken, chain N, P and organic carbon was also removed, and improve the effect of CODNB there. It can complete removal of organic matter, nitrogen and phosphorus nitrification and remove the excess intake of functions, nitrogen is the premise of NH3-N should fully nitrification, aerobic pool can finish this function is complete, oxygen and nitrogen pool. an-oxygen pool and oxygen pool jointly completed phosphorus function. Key words: urban sewage,activated sludge,A2/O 目录 引言……………………………………………………………………………...1 1 设计概述……………………………………………...………………………2 1.1设计任务 2 1.2设计原则 2 1.3 设计依据 3 2 工艺流程及说明 3 2.1 工艺方案分析 3 2.2工艺流程 4 2.3 流程各结构介绍 4 2.3.1格栅 4 2.3.2沉砂池 5 2.3.3初沉池 5 2.3.4生物化反应池 5 2.3.5二沉池 7 2.3.6浓缩池 7 3构筑物设计计算 7 3.1粗格栅 8 3.1.1设计说明 8 3.1.2参数选择 8 3.1.3设计计算 9 3.2污水提升泵 10 3.2.1设计参数 10 3.2.2泵房设计计算 10 3.3细格栅 11 3.3.1设计参数 11 3.3.2设计计算 11 3.4沉砂池 13 3.4.1设计说明 13 3.5初沉池 14 3.5.1设计说明 14 3.5.2设计计算 15 3.6生化池 16 3.6.1设计说明 16 3.6.2设计计算 17 3.6.3反应池容积 17 3.6.4校核氮磷负荷 18 3.6.5剩余污泥量 18 3.6.6反应池尺寸 18 3.6.7反应池进、出水系统计

文档评论(0)

1亿VIP精品文档

相关文档