机械制造专业毕业论文--夹具设计说明书.docVIP

摘 要 关键词：Abstract The present paper is combing the actual production at present, which is that either using universal fixture cannot meet only production requirements or using universal fixture clamping work-piece to product is poor efficiency and powerful labor and not high processing quality or often it need to increase crossed process, to specially design two fixture: milling fixture and drilling fixture, mainly including schemes of fixture positioning, clamping and cutter, the design of the concrete and the TAB folder and the analysis of machining precision et al. The milling fixture, having good processing precision and targeted, mainly is used to process dial the fork parts milling flutes. The fixture with clamping force device has the characteristics of efficiency and precision required by modern machine tools. It is so effectively to reduce the processing time and auxiliary time that greatly improve the labor productive, effectively reduce the labor intensity and increase the work efficiency as well. Drilling fixture is good for raising productivity, expanding machine machining scope, reducing labor intensity and ensuring the production safety. Therefore, it is especially important to learn and study the knowledge of fixture and design new suitable for practical production fixture nowadays. Key words：fficiency 目 录 要.................................................I Abstract.......................... ......................II 1 绪论...................................................1 1.1 夹具概念....................................................1 1.2 夹具的主要功能..............................................1 1.3 夹具的分类..................................................1 1.4 夹具的组成..................................................2 1.5 常用定位元件及选用..........................................2 1.6 工件的夹紧..................................................8 1.7 机床夹具的现状及发展方向...................................11 2 钻床夹具设计..........................................12 2.1 工件预加工内容....