红薯去皮机的的设计（含全套CAD图纸）.docVIP

由于部分原因，说明书已删除大部分，完整版说明书，CAD图纸等，联系648328618 红薯去皮机的设计 摘 要：主要介绍了以摩擦原理为基础的、适合食品加工工厂等场所使用的红薯去皮机的设计要点、工作原理和设备组成。不管任何形式的红薯加工，去皮都是一项重要的操作环节。因此，根据不同需求，开发了一系列的红薯去皮机。它们的性能也被不断的评估。去皮用于多种水果和蔬菜的加工中以除去不需要或不可食的物质，并改善成品的外观。主要的考虑因素包括通过尽可能减少去掉的部分以及可能降低能源、劳力和物质成本来降低总成本。这里，介绍摩擦去皮方法：食品被放置在金刚砂滚轴上或内壁排列着金刚砂的转筒中，在磨损力的表面除去食品的表皮后又被大量的水冲洗干净。该方法的优点是由于过程是在温室下进行而具有的能源成本低以及资本成本低、无热损伤，食品外观良好的优点，不规则食品表面（如红薯上的“孔眼”）会破坏去皮产品的外观，需要手工去除。 关键词：红薯去皮机；摩擦；去皮；传动 THE DESIGN OF THE SWEET POTATO PEELERS Abstract：Mainly introduces the principle based on friction, suitable for food processing factory and other places of use of the sweet potato skin-peeling-off machine the main points of design, working principle and composition of equipment. No matter in any form of sweet potato processing, to age is an important part of the operation. Therefore, according to the different demand, the development of a series of sweet potato skin-peeling-off machine. Their performance was constant evaluation.Skin peeling (for) of fruits and vegetables processing to remove need not eat or not, and improve the physical appearance of the product. The main factors including through minimize removed part and may reduce the labor and material costs energy, reduce the total cost. Here introduces friction peel method: food is placed on the walls or emery roller drum lined up in the emery, wear away the food of skin surface by the amount of water after washing clean. The advantage of this method is due process is conducted in greenhouse with low cost and the energy of capital cost is low, no heat, the advantages of good food appearance, irregular food surfaces (sweet potato holes) destroys peel product appearance, need manual removal. Key Words：sweet potato;friction;peeling;transmission 1 前言 1.1 目的意义和国内外现状概况 世界红薯 97.9%的面积集中在发展中国家。日本、美国、韩国等发达国家和地区栽培面积一直呈下降趋势。目前栽培面积仅相当于60年代的5%。据联合国粮农组织统计世界上共有111个国家栽培红薯.中国是世界最大的红薯生产国.中国薯类生产相对比较集中，以2003年为例，9个省份的产量就占全国的74%。 红薯消费包括饲料、种子、废料、食物、其他用途等。 2002年， 中国红薯的总消费量是11693.9万吨， 用作饲料的有5510.8万吨 ，用作种子的有0.03万吨，