外文翻译-刀具配置文件和默认工具（设计刀具及刀柄）.docVIP

科技外文翻译 翻译名称 VERICUT翻译原文 系 别 专 业 班 级 姓 名 指导教师 外语文献： Session 10- Mill Tool Profiles and a Default Tool（设计刀具及刀柄） This session shows how to use VERICUTs?Tool Manager to define a tool assembly (cutter and holder) via profile descriptions. The tool is specified as the default tool via the?Override feature. Supplying a tool description in this manner is useful when the tool path file does not contain tool descriptions, or to test alternate tools. This session demonstrates defining a corner rounding mill tool assembly similar to that shown below. The?Tool Manager allows tools having almost any shape to be easily defined, as well as provides collision detection between non-cutting portions of the tool and the workpiece. Session Steps: 1. In VERICUT, open the sample mcdblock.usr User file File Open Shortcut=CGTECH_SAMPLES File Name=mcdblock.usr,?Open （3坐标立铣） If prompted, respond as follows:?Reset cut model??Reset / Save changes??No 2. To improve visibility of tool profiles, rotate the view another 50 degrees X- View Layout Standard 1 View View Orient Increment=50, X- Fit Close 3. Change the position of the program zero (Work Offset G54) View Axes Driven Point Zero Close Setup G-Code Settings; Tables Highlight the table record below Work Offsets Add/Modify Select From/To Location In the From row,? Name = Tool In the To row,? Name = Stock Offset= -2 0 4.6 Modify Close OK 4. Access the Tool Manager and create a new Tool Library file Setup Tool Manager File New 5. Use the Profile option to describe the corner round form tool shown below (use tool ID 999) Add New Tool Mill ID=999 Description=CORNER RND EM Add Cutter... ? ? Profile? Add - adds?Point?X=0.0000 Z=0.0000 Grid Size = .5 Pick point 1 grid right from the tool origin point. (Note that?GridSize is .5, also the current cursor position is indicated ne