文献翻译—线控技术在汽车上的运用.docVIP

附 录 附录 A1 Wire control technology in car use 1.Line Control Move (Volkswagen wire) By Line control servo system powered by realize electronic device, control device, gearing, brake four parts. ECU (electronic control units) for brake system for overall control by new electronic brake, each brakes have their own control unit. Mechanical connection reduce gradually, the brake pedal and brake the power transfer between separated, to be replaced by wire, wire transfer energy, cable relay signals. Line control move in cars since ABS since widely used on the braking system of once again skip-type development. Current line control servo system is divided into two types: one is the electro-hydraulic braking system hydraulic EHB (Electronic - Volkswagen), another kind is Electronic Mechanical braking system Mechanical EMB (Electronic - Volkswagen). Electric hydraulic brake system of electronic and hydraulic system is to combine electronic control system, by hydraulic system provide motivation; Electronic and mechanical braking system will replace traditional brake system with wire the air or brake fluid force transmission medium, such as electric brakes to replace traditional brake, electronic and mechanical braking system is the development direction of future braking system. Line control servo system is the common features is Angle with the pedal force can step by step; the proportion of electronic control Has control of braking torque and pedal Angle corresponding program control unit; Program control unit can be based on other sensors or controller input signal active braking and other function realization. 2. Wire Control Steering System Wire control Steering System referred By Steering SBW (By Wire System), it has the function of the network connection fault-tolerant control unit, actuators and sensors and redundancy of electronic control units, cancel the Steering dish and Steering wheel mechanical connection between entirely By electricity, realize Steering