叉形件工艺及车床夹具设计（含全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 摘 要 本次毕业设计的题目是叉形件工艺及车床夹具设计。主要的设计思路是：分析零件的特点、拟订合理的工艺规程，选择适当的机床、设计合理的夹具。在机械加工零件中如果能广泛地使用夹具，就能极大的节省加工时所用的时间，以减轻工人的劳动量，提高劳动生产率和产品的质量。 设计夹具一般先对原始材料进行分析，明确设计的要求和意图，然后提出具体的定位和夹紧方案及车床夹具设计。本文5号莫氏锥体（锥柄式心轴）和弹簧片自动定心装置来保证设计的可靠,最后还对夹具的精度进行了分析。 本次毕业设计是专业课程的理论学习和实践之后的最后一个教学环节，通过本次设计对所学专业课程的理论加以综合并增加生产实践知识，经过实际训练，从而培养和提高个人独立工作的能力。巩固与扩充了相关课程内容，掌握其设计的方法和步骤。在设计中查阅了大量的机械书籍，在此过程中锻炼并提高了机械设计的基本技能，如计算、绘图、查阅设计资料和手册；熟悉机械设计标准及其它有关的标准和规范，并在设计中加以贯彻，对今后的工作与学习打下了坚实的基础。 关键词：叉形件，工艺规程，机床夹具 ABSTRACT This graduation design topic is fork and lathe fixture design process .The main design way of thinking BE: the feature of the parts is analyzed so as to plan the reasonable process and select the corresponding machine and jig. Machined parts if they can widely used fixture, you can greatly save the auxiliary time when the processing in order to reduce the amount of labor of workers, improve labor productivity and product quality. Design fixture first general analysis of the raw materials, design requirements and intentions clear, and then propose specific positioning and clamping programs ,. lathe fixture design process .Positioning an article using 5 Morse cone structure to ensure the reliability of the design, but also on the accuracy of the clamp is analyzed. This graduation design is profession course of theories study and after practice of the last teaching link, pass this design to learn profession course of the theories take in to synthesize and increase produce to practice knowledge, pass by training of machine design, develop and raise thus personal independence work of ability. Make stronger and enlarged the related course contents. Control the method and step of its design. Checked a great deal of machine book in the design, toughen in this process and raised the basic technical ability of machine design, such as calculation, paint, check design data and manual; Acquaint with standard and other of the machine desig